This study provides an empirical assessment of energy use and greenhouse gas ͑GHG͒ emissions associated with high and low residential development. Three major elements of urban development are considered: construction materials for infrastructure ͑including residential dwellings, utilities, and roads͒, building operations, and transportation ͑private automobiles and public transit͒. Two case studies from the City of Toronto are analyzed. An economic input-output life-cycle assessment ͑EIO-LCA͒ model is applied to estimate the energy use and GHG emissions associated with the manufacture of construction materials for infrastructure. Operational requirements for dwellings and transportation are estimated using nationally and/or regionally averaged data. The results indicate that the most targeted measures to reduce GHG emissions in an urban development context should be aimed at transportation emissions, while the most targeted measures to reduce energy usage should focus on building operations. The results also show that low-density suburban development is more energy and GHG intensive ͑by a factor of 2.0-2.5͒ than high-density urban core development on a per capita basis. When the functional unit is changed to a per unit of living space basis the factor decreases to 1.0-1.5, illustrating that the choice of functional unit is highly relevant to a full understanding of urban density effects.

The potential of forest-based bioenergy to reduce greenhouse gas (GHG) emissions when displacing fossil-based energy must be balanced with forest carbon implications related to biomass harvest. We integrate life cycle assessment (LCA) and forest carbon analysis to assess total GHG emissions of forest bioenergy over time. Application of the method to case studies of wood pellet and ethanol production from forest biomass reveals a substantial reduction in forest carbon due to bioenergy production. For all cases, harvest-related forest carbon reductions and associated GHG emissions initially exceed avoided fossil fuel-related emissions, temporarily increasing overall emissions. In the long term, electricity generation from pellets reduces overall emissions relative to coal, although forest carbon losses delay net GHG mitigation by 16-38 years, depending on biomass source (harvest residues/standing trees). Ethanol produced from standing trees increases overall emissions throughout 100 years of continuous production: ethanol from residues achieves reductions after a 74 year delay. Forest carbon more significantly affects bioenergy emissions when biomass is sourced from standing trees compared to residues and when less GHG-intensive fuels are displaced. In all cases, forest carbon dynamics are significant. Although study results are not generalizable to all forests, we suggest the integrated LCA/forest carbon approach be undertaken for bioenergy studies.

No abstract

Utilizing domestically produced cellulose-derived ethanol for the light-duty vehicle fleet can potentially improve the environmental performance and sustainability of the transport and energy sectors of the economy. A life cycle assessment model was developed to examine environmental implications of the production and use of ethanol in automobiles in Ontario, Canada. The results were compared to those of low-sulfur reformulated gasoline (RFG) in a functionally equivalent automobile. Two time frames were evaluated, one near-term (2010), which examines converting a dedicated energy crop (switchgrass) and an agricultural residue (corn stover) to ethanol; and one midterm (2020), which assumes technological improvements in the switchgrass-derived ethanol life cycle. Near-term results show that, compared to a RFG automobile, life cycle greenhouse gas (GHG) emissions are 57% lower for an E85-fueled automobile derived from switchgrass and 65% lower for ethanol from corn stover, on a grams of CO2 equivalent per kilometer basis. Corn stover ethanol exhibits slightly lower life cycle GHG emissions, primarily due to sharing emissions with grain production. Through projected improvements in crop and ethanol yields, results for the mid-term scenario show that GHG emissions could be 25-35% lower than those in 2010 and that, even with anticipated improvements in RFG automobiles, E85 automobiles could still achieve up to 70% lower GHG emissions across the life cycle.

The use of coal is responsible for (1)/(5) of global greenhouse gas (GHG) emissions. Substitution of coal with biomass fuels is one of a limited set of near-term options to significantly reduce these emissions. We investigate, on a life cycle basis, 100% wood pellet firing and cofiring with coal in two coal generating stations (GS) in Ontario, Canada. GHG and criteria air pollutant emissions are compared with current coal and hypothetical natural gas combined cycle (NGCC) facilities. 100% pellet utilization provides the greatest GHG benefit on a kilowatt-hour basis, reducing emissions by 91% and 78% relative to coal and NGCC systems, respectively. Compared to coal, using 100% pellets reduces NO(x) emissions by 40-47% and SO(x) emissions by 76-81%. At $160/metric ton of pellets and $7/GJ natural gas, either cofiring or NGCC provides the most cost-effective GHG mitigation ($70 and $47/metric ton of CO2 equivalent, respectively). The differences in coal price, electricity generation cost, and emissions at the two GS are responsible for the different options being preferred. A sensitivity analysis on fuel costs reveals considerable overlap in results for all options. A lower pellet price ($100/metric ton) results in a mitigation cost of $34/metric ton of CO2 equivalent for 10% cofiring at one of the GS. The study results suggest that biomass utilization in coal GS should be considered for its potential to cost-effectively mitigate GHGs from coal-based electricity in the near term.

No abstract

The magnitude of Canada's oil sands reserves, their rapidly expanding and energy intensive production, combined with existing and upcoming greenhouse gas (GHG) emissions regulations motivate an evaluation of oil sands-derived fuel production from a life cycle perspective. Thirteen studies of GHG emissions associated with oil sands operations are reviewed. The production of synthetic crude oil (SCO) through surface mining and upgrading (SM&Up) or in situ and upgrading (IS&Up) processes is reported to result in emissions ranging from 62 to 164 and 99 to 176 kgCO 2 eq/bbl SCO, respectively (or 9.2-26.5 and 16.2-28.7 gCO 2 eq MJ −1 SCO, respectively), compared to 27-58 kgCO 2 eq/bbl (4.5-9.6 gCO 2 eq MJ −1 ) of crude for conventional oil production. The difference in emissions intensity between SCO and conventional crude production is primarily due to higher energy requirements for extracting bitumen and upgrading it into SCO. On a 'well-to-wheel' basis, GHG emissions associated with producing reformulated gasoline from oil sands with current SM&Up, IS&Up, and in situ (without upgrading) technologies are 260-320, 320-350, and 270-340 gCO 2 eq km −1 , respectively, compared to 250-280 gCO 2 eq km −1 for production from conventional oil. Some variation between studies is expected due to differences in methods, technologies studied, and operating choices. However, the magnitude of the differences presented suggests that a consensus on the characterization of life cycle emissions of the oil sands industry has yet to be reached in the public literature. Recommendations are given for future studies for informing industry and government decision making.

No abstract