AbstractTaste and odor in drinking water are one of the main problems of water supply and treatment sector. Peroxone is an effective advanced oxidation process, which combines ozone with hydrogen peroxide to create hydroxyl radicals that decompose organic compounds. 2-Methylisoborneol (2-MIB) is one of the significant taste and odor causing compounds, which can be removed with peroxone process. In this study, removal of 2-MIB compound by peroxone process was investigated in a pilot scale treatment plant and optimum operational conditions were determined. For safety reasons, it is important that residual O3 and H2O2 concentrations in the water leaving the reactor should not exceed to 0.1 and 0.5 mg/L, respectively. Results indicate that while dissolved ozone concentration was below the indicated limit for all experiments, concentrations over 0.5 mg/L residual H2O2 were observed during the experiments with a H2O2:O3 ratio of 0.5. This limit exceedance affected the decision of the ideal peroxone ratio along with the 2-MIB removal results. Therefore; optimum H2O2:O3 ratio was determined as 0.3. 2-MIB removal efficiency of 81% was achieved at the optimum H2O2:O3 ratio with a contact time of 15 min. According to the results, 2-MIB removal rate had a linear correlation with the contact time.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.