This research aims to examine the impact of using natural and synthetic fibres as reinforcing materials, on the mechanical properties and water susceptibility of cold mix asphalt (CMA) including indirect tensile stiffness and resistance to rutting, cracking and moisture damage. Four different types of fibres were used: glass as a synthetic fibre, and hemp, jute and coir as natural fibres. Various samples of CMA, with and without fibres, were fabricated and tested. Traditional hot mix asphalt (HMA) was also used for comparison. The results indicate a significant improvement in the indirect tensile stiffness modulus, for all fibre-reinforced CMA mixtures, over different curing times. The improved tensile behaviour represents a substantial contribution towards slowing crack propagation in bituminous mixtures, while scanning electron microscopy analysis confirmed the fibre shape and surface roughness characteristics. The improved performance of the reinforced mixtures with both natural and synthetic fibres, facilitated a substantially lower permanent deformation than traditional hot and cold mixtures at two different temperatures (45 and 60°C). When using glass and hemp fibres as reinforcing materials, there was 2 a significant improvement in CMA in terms of water sensitivity. Resistance to surface cracking was also improved when fibres were incorporated. Based on the test results, 0.35% fibre content by mass of dry aggregate and 14mm fibre length are recommended to achieve the optimum performance output for indirect tensile stiffness.
This paper describes the development of a three-dimensional (3-D), finite element model (FEM) of flexible pavements made with cold mix asphalt (CMA), which has itself been reinforced with two different natural fibres: jute and coir. A 3-D finite element model was employed to predict the viscoelastic response of flexible CMA pavements when subjected to multiple axle loads, different bituminous material properties, tire speeds and temperatures. The analysis was conducted by the finite element computer package ABAQUS/STANDARD. The pavements were subject to cyclic and static loading conditions to test for permanent deformation (rutting). The accuracy of the developed model was validated by comparing the predicted results with those measured in the lab. Reinforced and unreinforced CMA mixture models were simulated in this research. The results indicate that the CMA mixtures reinforced with natural fibres, are effective in mitigating permanent deformation (rutting). These reinforcing materials can extend the service life of flexible pavements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.