To utilize maskless lithography using a liquid-crystal-display (LCD) panel for printing thick resist patterns, a novel two-layer resist process was developed. In the past research, simple and low-cost maskless exposure system was developed using an LCD panel in place of a reticle. However, commercial LCDs were fabricated not to irradiate short-wavelength light rays for protecting human eyes. Therefore, only thin g-line resists have been applicable for printing patterns. Nevertheless, patterning in 10-100 μm thick resist is frequently required for fabricating fluidic devices, lens arrays, and others. For this reason, a conventional g-line resist was coated on a thick UV resist, and patterns of g-line resist formed using the LCD maskless lithography was used as exposure masks of the bottom layer UV resist. As a result, various test patterns with widths of down to 40 μm and almost vertical side walls were successfully printed in the 70 μm thick UV resist.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.