The type and the properties of the soil can potentially intensify the internal forces on buildings during seismic loads. To predict the effects of the soil parameters on the soil–structure interaction of buildings, it is necessary to consider the soil–structure interaction (SSI) in the modeling process. Therefore, this document aims to evaluate the seismic effect on the maximal displacement and inter-story drift, and evaluate the behavior of buildings under the second-order effect known in the literature as the P-delta effect. For this purpose, three cases of buildings with 5, 10 and 15 stories were modelled using a FLAC 2D finite-difference element calculation software with infinite soil conditions, including five types of base with four types of soil (one cohesive soil and three non-cohesive soils) considering the soil–structure interaction and a fixed base (without soil–structure interaction). According to the results for the above-mentioned boundary, as the height of the building increases and due to the weak properties of the soil, we notice that the maximal displacements and inter-story drift increase considerably. To that purpose, we recommend considering the second-order effect in seismic design, especially for non-cohesive soil.
Abstract. Considering in this work, a simplified methodology was proposed in order to evaluate seismic vulnerability of Reinforced Concrete Bridge. Reliability assessment of stress limits state and the applied loading which are assumed to be random variables. It is assumed that only their means and standard deviations are known while no information is available about their densities of probabilities. First Order Reliability Method is applied to a response surface representation of the stress limit state obtained through quadratic polynomial regression of finite element results. Then a parametric study is performed regarding the influence of the distributions of probabilities chosen to model the problem uncertainties for Reinforced Concrete Bridge. It is shown that the probability of failure depends largely on the chosen densities of probabilities, mainly in the useful domain of small failure probabilities.
The present work proposes a vibration study with different surface and layers orientations at 0°, 15°, 30°, 45°, 60°, 75° and 90°using the Abaqus finite element code, the frequencies Stratified laminate composite panels were studied and the comparison between damaged structures and perfect structures we used stiffened panels based on T-shaped reinforced fibers. Lamb waves (LW) were widely proposed for the long-range inspection of Structural Structural Health Monitoring (SHM) oriented composite structures, the obtained results show the angle effects on the natural frequency increase at a peak then decrease in the form of a sinusoidal half-curve and the numerical results found in this work can be compared to those of other authors in the same area of research, A piezoelectric actuator is used to design acoustic waves and a sensor is used for signal acquisition.
This study is concerned to the investigation of the stability of bridges by taking into account the soil structure interaction and their impact on the dynamic behavior of the structures. The bridge studied is localized at PK 318 + 750 at the national level, between the city of Al Hoceima and Kasseta (Morocco). The analyses are carried out with the ANSYS code demonstrated that for conditions of support, the distribution of displacements and the fundamental frequency for each type of soil change according to its mechanical properties. This work also indicates that the proximity of the fundamental frequencies of the soil structure and strongly influences the soil-structure interaction.
In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.
In this work, the dynamic buckling of stiffened panels is evolved numerically through a nonlinear incremental expression through making use of a specific time integration procedure via the finite element software program. the buckling and post-buckling behaviours of hat-stringer-stiffened composite curved panel under axial compression load .Dynamic buckling is extracted from the curve abandoning the very last shortening as a characteristic of time while the shape is subjected with the aid of a square compression pulse movement carried out inside the axial direction. The duration of the heart beat and the amplitude of curvature of decreasing of the cloth inside the band tormented by the warmth, the dynamic buckling motion, are constant. The method approach was proposed to predict the dynamic buckling load of curved panel. Finite element analysis was used to investigate these tests and the FE models were performed by ABAQUS.Approach to determine the reliability of the stiffened panel in dynamic buckling state.
Abstract. In this work, the dynamic buckling of stiffened panels is evolved numerically through a nonlinear incremental expression through making use of a specific time integration procedure via the finite element software program. the buckling and post-buckling behaviours of hat-stringer-stiffened composite curved panel under axial compression load .Dynamic buckling is extracted from the curve abandoning the very last shortening as a characteristic of time while the shape is subjected with the aid of a square compression pulse movement carried out inside the axial direction. The duration of the heart beat and the amplitude of curvature of decreasing of the cloth inside the band tormented by the warmth, the dynamic buckling motion, are constant. The method approach was proposed to predict the dynamic buckling load of curved panel. Finite element analysis was used to investigate these tests and the FE models were performed by ABAQUS.Approach to determine the reliability of the stiffened panel in dynamic buckling state.
Considering in this work, a simplified methodology was proposed in order to evaluate seismic vulnerability of Reinforced Concrete Bridge. Reliability assessment of stress limits state and the applied loading which are assumed to be random variables. It is assumed that only their means and standard deviations are known while no information is available about their densities of probabilities. First Order Reliability Method is applied to a response surface representation of the stress limit state obtained through quadratic polynomial regression of finite element results. Then a parametric study is performed regarding the influence of the distributions of probabilities chosen to model the problem uncertainties for Reinforced Concrete Bridge. It is shown that the probability of failure depends largely on the chosen densities of probabilities, mainly in the useful domain of small failure probabilities.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.