A series of new N-halamine epoxide precursors, 3-glycidyl-5,5-dialkylhydantoins (GH's), has been synthesized by a very facile and economic method. Cellulose surfaces can be treated with GH's and rendered biocidal by exposure to halogen solutions after curing the treated material. The biocidal efficacy tests showed that the chlorinated treated cellulose surfaces were antimicrobial with contact times required for 6-7 log reductions of Staphylococcus aureus and Escherichia coli O157:H7 of 5-30 min. It was found in simulated washing tests that celluloses, such as cotton swatches, treated with 3-glycidyl-5,5-dimethylhydantoin were quite stable and could survive more than the equivalent of 50 repeated home launderings with very little loss. Upon loss of the biocidal property due to long-term use, the treated surfaces could be recharged by further exposure to dilute bleach to regain antimicrobial activity. In addition, since only water was used as a solvent for the synthesis of GH's at room temperature, the reaction solution could be directly used as a treatment solution. Stability tests showed that the reaction solutions were relatively stable at room temperature and more stable at 5 °C over a period of at least 30 d. Preliminary experiments have shown that polyester swatches can also be treated with GH's and be rendered biocidal upon treatment with household bleach. The entire process should be economical for commercial application.

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.

A new N-halamine copolymer has been prepared, characterized, and evaluated for antimicrobial efficacy, stability toward hydrolyses, and stability toward UVA degradation when covalently bound to cellulose fibers. A copolymer of 3-chloro-2-hydroxypropylmethacrylate and glycidyl methacrylate was coated onto cotton, and, after curing, was treated with an aqueous solution containing the potassium salt of 5,5-dimethylhydantoin to form a coating which became antimicrobial upon exposure to househod bleach (sodium hypochlorite). The coating inactivated S. aureus and E. coli O157:H7 within minutes of contact time and was quite stable toward washing and UVA photodegradation.

No abstract

Generally, antimicrobial N-halamine siloxane coatings can be rehalogenated repetitively upon loss of their biocidal efficacies, a marked advantage over coatings containing other antimicrobial materials. However, the N-halamine materials tend to slowly decompose upon exposure to ultraviolet irradiation as in direct sunlight. In this work the mechanism of photolytic decomposition for the N-halamine siloxanes has been studied using spectroscopic and theoretical methods. It was found that the N-chlorinated coatings slowly decomposed upon UVA irradiation, whereas the unhalogenated coatings did not. Model compound evidence in this work suggests that upon UVA irradiation, the N-Cl bond dissociates homolytically, followed by a Cl radical migration to the alkyl side chain connected to the siloxane tethering group. An alpha and/or beta scission then occurs causing partial loss of the biocidal moiety from the surface of the coated material, thus precluding complete rechlorination. NMR, FTIR, GCMS, and computations at the DFT (U)B3LYP/6-311++G(2d,p) level of theory have been employed in reaching this conclusion.

Two N-halamine siloxane precursors, 5,5-dimethyl-3-(3 0 -triethoxysilylpropyl)hydantoin and 3-(3 0 -triethoxysilylpropyl)-7,7,9,9-tetramethyl-1,3,8-triazaspiro[4.5]-decane-2,4-dione, have been synthesized and coated onto polyester fiber surfaces. The coated polyester was rendered biocidal after exposure to household bleach solution by converting the heterocyclic precursors to N-halamine moieties. The thermal properties of these coated polyester samples were determined with differential scanning calorimetry. The chlorinated polyester swatches were challenged with Staphylococcus aureus (ATCC 6538) and Escherichia coli O157 : H7 (ATCC 43895) with contact times ranging from 1 to 30 min. The biocidal testing showed that the chlorinated samples inactivated S. aureus and E. coli O157 : H7 within 5 and 30 min of contact, respectively. Standard washing tests indicated that the chlorinated coated fibers were very resistant to loss of the coating through hydrolyses.

No abstract

Variation of alkyl substitution at position 5 on the hydantoin ring of a series of N-halamine siloxane derivatives has been employed to better understand the biocidal activities of these compounds for use in preparing antimicrobial coatings. The alkyl derivatization of the hydantoin ring at its 5 position, while an essentially constant chlorine loading is maintained at the 1 position, has shown that there is little dependence of the antimicrobial efficacy against Escherichia coli O157:H7 on the alkyl chain length, in contrast to reported observations for biocidal quaternary ammonium salt derivatives. The stabilities of the derivatives toward hydrolyses and ultraviolet light exposure have also been found to not be dependent upon the nature of the alkyl substituent group. These observations led to the conclusion that the 5,5-dimethyl derivative would be recommended for use, since it is the least expensive alternative.