SummaryThe mechanical properties of bitumen, such as elasticity/Young's modulus, stickiness/adhesion, hardness and energy loss, and sample deformation were acquired quantitatively and simultaneously with the topology at the microscale, discriminating clearly two separate phases within the bitumen. Temperature-dependent measurements revealed detailed and specific data about the changes of these properties with temperature, enabling the development of predictive models for the performance and durability of asphalt.
Multicomponent nanocomposite materials based on a high-performance epoxy system and single-walled carbon nanotubes (SWNTs) have been prepared. The noncovalent wrapping of nitric acid-treated SWNTs with a PEO-based amphiphilic block copolymer leads to a highly disaggregated filler with a boosted miscibility in the epoxy matrix, allowing its dispersion without organic solvents. Although direct dispersion of acid-treated SWNTs results in modestly improved epoxy matrix mechanical properties, the incorporation of wrapped SWNTs produces a huge increase in toughness (276% improvement at 0.5 wt % loading) and impact strength (193% at 0.5 wt % loading) with no detrimental effect on the elastic properties. A synergistic effect between SWNTs and the block copolymer is revealed on the basis of tensile and impact strength results. Atomic force microscopy has been applied, obtaining stiffness mappings that identify nanostructure features responsible of the dynamic mechanical behavior. The electrical percolation threshold is greatly reduced, from 0.31 to 0.03 wt % SWNTs when block copolymer-wrapped SWNTs are used, and all the measured conductivity values increased up to a maximum of 7 orders of magnitude with respect to the baseline matrix (1 wt % wrapped-SWNTs loading). This approach provides an efficient way to disperse barely dispersible SWNTs without solvents into an epoxy matrix, and to generate substantial improvements with small amounts of SWNTs.
The
chemical patterning of graphene is being pursued tenaciously
due to exciting possibilities in electronics, catalysis, sensing,
and photonics. Despite the intense efforts, spatially controlled,
multifunctional covalent patterning of graphene has not been achieved.
The lack of control originates from the inherently poor reactivity
of the basal plane of graphene, which necessitates the use of harsh
chemistries. Here, we demonstrate spatially resolved multicomponent
covalent chemical patterning of single layer graphene using a facile
and efficient method. Three different functional groups could be covalently
attached to the basal plane in dense, well-defined patterns using
a combination of lithography and a self-limiting variant of diazonium
chemistry requiring no need for graphene activation. The layer thickness
of the covalent films could be controlled down to 1 nm. This work
provides a solid foundation for the fabrication of chemically patterned
multifunctional graphene interfaces for device applications.
Novel nanocomposites based on conductive Ag nanoparticles and a self‐assembled polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS) block copolymer were investigated. Good confinement of the nanoparticles into polystyrene microphase was achieved by the addition of DT as surfactant. The polymeric matrix kept its hexagonal order packed cylindrical structure up to 7 wt.‐% content of Ag nanoparticles. An electrostatic force microscopy (EFM) analysis of well‐dispersed metal‐organic hybrid Ag/SBS films was used to characterize the electric behavior of the conductive nanocomposites.magnified image
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.