No abstract

Three-dimensional printing (3DP) refers to a group of additive manufacturing techniques that can be utilized in tissue engineering applications. Fused deposition modeling (FDM) is a 3DP method capable of using common thermoplastic polymers. However, the scope of materials applicable for FDM has not been fully recognized. The purpose of this study was to examine the creation of biodegradable porous scaffold structures using different materials in FDM and to determine the compressive properties and the fibroblast cell response of the structures. To the best of our knowledge, the printability of a poly(ε-caprolactone)/bioactive glass (PCL/BAG) composite and L-lactide/ε-caprolactone 75/25 mol % copolymer (PLC) was demonstrated for the first time. Scanning electron microscope (SEM) images showed BAG particles at the surface of the printed PCL/BAG scaffolds. Compressive testing showed the possibility of altering the compressive stiffness of a scaffold without changing the compressive modulus. Compressive properties were significantly dependent on porosity level and structural geometry. Fibroblast proliferation was significantly higher in polylactide than in PCL or PCL/BAG composite. Optical microscope images and SEM images showed the viability of the cells, which demonstrated the biocompatibility of the structures.

No abstract

Cross‐linked ε‐caprolactone (CL) and D,L‐lactide (DLLA) copolymers with elastic properties were synthesized in three steps. First, the monomers were copolymerized in ring‐opening polymerization to obtain telechelic star‐shaped oligomers with almost completely random monomer distribution. The oligomers were methacrylated with methacrylic anhydride in the second step and cured in a third. Molar CL/DLLA compositions of 30/70, 50/50, 70/30, 90/10, and 100/0 were used to obtain elastic structures with a wide range of properties. The effect of the average length of the copolymer block on the properties of the networks was evaluated with three different co‐initiator contents (0.5, 1.0, and 2.0/100) in the oligomer synthesis. The oligomers were characterized by 13C NMR spectroscopy, size‐exclusion chromatography (SEC), and differential‐scanning calorimetry (DSC). The formation of elastic networks was confirmed by the absence of a flow region in dynamic mechanical analysis (DMA), the increase in Tg in DSC, and the full recovery of the sample dimensions after tensile testing. In addition, gel contents were high and the samples swelled in CH2Cl2. The networks possessed break stresses from 0.7–9.7 MPa with elongations from 80–350%. Networks with 100 or 90% of ε‐caprolactone retained their form in vitro for 12 weeks, but an increase in lactide content made the networks more vulnerable to hydrolysis. Water absorption of the polymers during hydrolysis.magnified imageWater absorption of the polymers during hydrolysis.

No abstract