Although the field of polymer solar cell has seen much progress in device performance in the past few years, several limitations are holding back its further development. For instance, current high-efficiency (>9.0%) cells are restricted to material combinations that are based on limited donor polymers and only one specific fullerene acceptor. Here we report the achievement of high-performance (efficiencies up to 10.8%, fill factors up to 77%) thick-film polymer solar cells for multiple polymer:fullerene combinations via the formation of a near-ideal polymer:fullerene morphology that contains highly crystalline yet reasonably small polymer domains. This morphology is controlled by the temperature-dependent aggregation behaviour of the donor polymers and is insensitive to the choice of fullerenes. The uncovered aggregation and design rules yield three high-efficiency (>10%) donor polymers and will allow further synthetic advances and matching of both the polymer and fullerene materials, potentially leading to significantly improved performance and increased design flexibility.

No abstract

Single crystalline zero-dimensional organic metal halide hybrids have been developed.

Organometal halide perovskites have recently emerged as a highly promising class of functional materials for a variety of applications. The exceptional structural tunability enables these materials to possess three- (3D), two- (2D), one- (1D), and zero-dimensional (0D) structures at the molecular level. Remarkable progress has been realized in the research of perovskites in recent years, focusing mainly on 3D and 2D structures but leaving low-dimensional 1D and 0D structures significantly underexplored. Here we offer our perspective on the most exciting developments in the low-dimensional organometal halide perovskites. Due to the strong quantum confinement and site isolation, 1D and 0D perovskites exhibit remarkable and useful properties that are significantly different from those of 3D and 2D perovskites. The excitement about the recent developments lies not only in the specific achievements but also in what these materials represent in terms of a new paradigm in materials design.

We report a series of difluorobenzothiadizole (ffBT) and oligothiophene-based polymers with the oligothiophene unit being quaterthiophene (T4), terthiophene (T3), and bithiophene (T2). We demonstrate that a polymer based on ffBT and T3 with an asymmetric arrangement of alkyl chains enables the fabrication of 10.7% efficiency thick-film polymer solar cells (PSCs) without using any processing additives. By decreasing the number of thiophene rings per repeating unit and thus increasing the effective density of the ffBT unit in the polymer backbone, the HOMO and LUMO levels of the T3 polymers are significantly deeper than those of the T4 polymers, and the absorption onset of the T3 polymers is also slightly red-shifted. For the three T3 polymers obtained, the positions and size of the alkyl chains play a critical role in achieving the best PSC performances. The T3 polymer with a commonly known arrangement of alkyl chains (alkyl chains sitting on the first and third thiophenes in a mirror symmetric manner) yields poor morphology and PSC efficiencies. Surprisingly, a T3 polymer with an asymmetric arrangement of alkyl chains (which is later described as having an "asymmetric bi-repeating unit") enables the best-performing PSCs. Morphological studies show that the optimized ffBT-T3 polymer forms a polymer:fullerene morphology that differs significantly from that obtained with T4-based polymers. The morphological changes include a reduced domain size and a reduced extent of polymer crystallinity. The change from T4 to T3 comonomer units and the novel arrangement of alkyl chains in our study provide an important tool to tune the energy levels and morphological properties of donor polymers, which has an overall beneficial effect and leads to enhanced PSC performance.

Non-fullerene organic solar cells with power conversion efficiencies of up to 6.3% are reported using properly matched donor and acceptor.

No abstract

The synthesis and characterization is reported of (C NH ) SnBr , a novel organic metal halide hybrid with a zero-dimensional (0D) structure, in which individual seesaw-shaped tin (II) bromide anions (SnBr ) are co-crystallized with 1-butyl-1-methylpyrrolidinium cations (C NH ). Upon photoexcitation, the bulk crystals exhibit a highly efficient broadband deep-red emission peaked at 695 nm, with a large Stokes shift of 332 nm and a high quantum efficiency of around 46 %. The unique photophysical properties of this hybrid material are attributed to two major factors: 1) the 0D structure allowing the bulk crystals to exhibit the intrinsic properties of individual SnBr species, and 2) the seesaw structure enabling a pronounced excited state structural deformation as confirmed by density functional theory (DFT) calculations.