SummaryLotus leaves have become an icon for superhydrophobicity and self-cleaning surfaces, and have led to the concept of the ‘Lotus effect’. Although many other plants have superhydrophobic surfaces with almost similar contact angles, the lotus shows better stability and perfection of its water repellency. Here, we compare the relevant properties such as the micro- and nano-structure, the chemical composition of the waxes and the mechanical properties of lotus with its competitors. It soon becomes obvious that the upper epidermis of the lotus leaf has developed some unrivaled optimizations. The extraordinary shape and the density of the papillae are the basis for the extremely reduced contact area between surface and water drops. The exceptional dense layer of very small epicuticular wax tubules is a result of their unique chemical composition. The mechanical robustness of the papillae and the wax tubules reduce damage and are the basis for the perfection and durability of the water repellency. A reason for the optimization, particularly of the upper side of the lotus leaf, can be deduced from the fact that the stomata are located in the upper epidermis. Here, the impact of rain and contamination is higher than on the lower epidermis. The lotus plant has successfully developed an excellent protection for this delicate epistomatic surface of its leaves.

The occurrence of various types of calcium oxalate crystals was studied in 251 species and subspecies of Cactaceae to determine whether they are useful characters for Cactaceae systematics. Crystal hydration states were identified by X-ray powder diffraction and polarizing microscopy as monoclinic calcium oxalate monohydrate (COM) and tetragonal calcium oxalate dihydrate (COD). Ninety-eight percent of taxa studied contained either COM or COD crystals, or both. Different morphologies of crystals were further defined by light microscopy and scanning electron microscopy as druses, raphides, styloids (prisms), and crystal sand. In particular, the preponderance of one of the hydration states (COM or COD) was characteristic for certain Cactus subfamilies. Data showed that in Pereskioideae, Maihuenioideae, and Opuntioideae COM is predominant, while in Cactoideae COD prevails. In the remainder of Cactoideae, the crystals were quite variable. In tribe Hylocereeae, many species form both COM and COD as well. In the genera Hylocereus , Epiphyllum , Selenicereus , and Weberocereus , COM forms were almost exclusively represented by raphides together with different crystal forms in their epidermal cells. In the remainder of the Cactoideae, crystals did not follow any observable patterns. Development of crystallographic standards for identifying crystal forms microscopically is proposed for future crystal studies.

The contact area between liquids and solid surfaces plays the crucial role in the wetting and self-cleaning properties of surfaces. In this study, we have developed a cryo-preparation method to visualize the contact area between liquids and superhydrophobic biological surfaces by scanning electron microscopy. Aqueous liquids that do not crystallize during freezing, such as glycerol and phosphoric acid, were used. First, the samples in contact with the liquid droplets were cooled with liquid nitrogen. After this, the droplets were separated and the contact areas on the frozen droplets were visualized by scanning electron microscopy. The contact areas of droplets on various biological and artificial surfaces with microstructure, nanostructure, and hierarchical structures are shown in detail. It could be shown that spaces between nanostructures were not penetrated by the droplet, which rested only on top of the structures. Measurements of the contact areas showed the largest reduction in the solid-liquid contact area on hierarchically structured leaf surfaces. On these surfaces, the droplets are in the "Cassie state" at both levels of surface structuring. On plant surfaces, the varying height of the epidermal cells and the surface relief caused considerable variations in the contact between droplet and surface. The examples demonstrate that this new approach provides detailed insights into the wetting behavior of surfaces in the Cassie state with partial contact with the liquid.