Infrared (IR) cameras based on semiconductors grown by epitaxial methods face two main challenges, which are cost and operating at room temperature. The alternative new technologies which can tackle these two difficulties develop new and facile material and methods. Moreover, the implementation of high speed camera, which makes high resolution images with normal methods, is very expensive. In this paper, a new nanostructure based on a cost-effective solution processed technology for the implementation of the high-speed mid-infrared light camera at room temperature is proposed. To this end, the chemically synthesized PbSe–PbI2 core–shell Quantum Dots (QDs) are used. In this work, a camera including 10 × 10 pixels is fabricated and synthesized QDs spin-coated on interdigitated contact (IDC) and then the fabricated system passivated by epoxy resin. Finally, using an electronic reading circuit, all pixels are converted to an image on the monitor. To model the fabricated camera, we solved Schrodinger–Poisson equations self consistently. Then output current from each pixel is modeled based on semiconductor physics and dark and photocurrent, as well as Responsivity and Detectivity, are calculated. Then the fabricated device is examined, and dark and photocurrents are measured and compared to the theoretical results. The obtained results indicate that the obtained theoretical and measured experimental results are in good agreement together. The fabricated detector is high speed with a rise time of 100 ns. With this speed, we can get 10 million frames per second; this means we can get very high-resolution images. The speed of operation is examined experimentally using a chopper that modulates input light with 50, 100, 250, and 500 Hz. It is shown that the fabricated device operates well in these situations, and it is not limited by the speed of detector. Finally, for the demonstration of the proposed device operation, some pictures and movies taken by the camera are attached and inserted in the paper.

Recently, all-optical modulators are potentially the most promising candidate to achieve high-bit rate modulation in high-speed all-optical communication technologies and signal processing. In this study, a two-channel all-optical modulator based on a solution-processed quantum dot structure is introduced for two sizes of quantum dots to operate at two wavelengths of MIR spectra (3 µm and 5 µm). To perform numerical and theoretical analysis and evaluate the optical behavior of the proposed all-optical modulator, the coupled rate and propagation equations have been solved by considering homogeneous and inhomogeneous broadening effects. The modulation depth at the 50 GHz frequency and 3 mW probe power is attained, about 94% for channel-1 with the wavelength of 559 nm at 300 Wcm−2 pump power density as well as approximately 83.5% for channel-2 with the wavelength of 619 nm at 500 Wcm−2 pump power density. The introduced two-channel all-optical modulator can operate simultaneously at two wavelengths during the modulation process in which information could be transmitted through both signals from the control light. This approach can present the practical device as a high-contrast and high-speed two-channel all-optical modulator with a high modulation depth in numerous applications such as thermal imaging in night vision cameras, wavelength de-multiplexing, signal processing, free-space communication.

No abstract