Better information regarding the spatial variability of height, Diameter at Breast Height (DBH) and stocking could improve inventory estimates at the operational Planning Unit since these parameters are used extensively in allometric equations, including stem volume, biomass and carbon calculations. In this study, the influence of stand stocking on height and DBH of two even aged radiata pine (Pinus radiata D. Don) stands were investigated using airborne Light Detection and Ranging (LiDAR) data at a study site in New South Wales, Australia. Both stands were characterized by irregular stocking due to patchy establishment and self-thinning in the absence of any silvicultural thinning events. For the purpose of this study, a total of 34 plots from a 34 year old site and 43 plots from a nine year old site were established, from which a total of 447 trees were sampled. Within these plots, DBH and height measurements were measured and their relationships with stocking were evaluated. LiDAR was used for height estimation as well as stem counts in fixed plots (stocking). The results showed a significant relationship between stem DBH and stocking. At both locations, trees with larger diameters were found on lower stocking sites. Height values were also significantly correlated with stocking, with taller OPEN ACCESS Remote Sens. 2014, 6 7593 trees associated with high stocking. These results were further verified of additional tree samples, with independent field surveys for DBH and LiDAR-derived metrics for height analysis. This study confirmed the relationship between P. radiata tree heights and stem diameter with stocking and demonstrated the capacity of LiDAR to capture sub-compartment variation in these tree-level attributes.
& Context Reliable information on tree stem diameter variation at local spatial scales and on the factors controlling it could potentially lead to improved biomass estimation over pine plantations. & Aims This study addressed the relationship between local topography and tree diameter at breast height (DBH) within two even-aged radiata pine plantation sites in New South Wales, Australia. & Methods A total of 85 plots were established, and 1,302 trees were sampled from the two sites. Airborne light detection and ranging (LiDAR) was used to derive slope and aspect and to link them to each individual tree. & Results The results showed a significant relationship between DBH and local topography factors. At both sites, trees on slopes below 20°and on southerly aspects displayed significantly larger DBHs than trees on steeper slopes and northerly aspects. Older trees with similar heights also exhibited a significant relationship between DBH and aspect factor, where greater DBHs were found on southerly aspects. & Conclusions The observed correlation between tree DBH and LiDAR-derived slope and aspect could contribute to the development of improved biomass estimation approaches in pine plantations. These topographical variables are easily attained with airborne LiDAR, and they could potentially improve DBH predictions in resource inventories (e.g. stand volume or biomass) and support field sampling design.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.