No abstract

Cigarette smoke is a significant source of cadmium, lead, and toxic elements, which are absorbed into the human organism. In this context, the aim of this study was to investigate in vitro the presence of toxic elements, cadmium, and lead deriving from cigarette smoke in the resin composite, dentine, and dental enamel. Eight cylindrical specimens were fabricated from resin composite, bovine enamel, and root dentin fragments that were wet ground and polished with abrasive paper to obtain sections with 6-mm diameter and 2-mm thickness. All specimens were exposed to the smoke of 10 cigarettes/day during 8 days. After the simulation of the cigarette smoke, the specimens were examined with scanning electron microscopy (SEM) and the energy-dispersive X-ray analysis. In the photomicrographic analysis in SEM, no morphological alterations were found; however, the microanalysis identified the presence of cadmium, arsenic, and lead in the different specimens. These findings suggest that the deposition of these elements derived from cigarette smoke could be favored by dental structures and resin composite.

The aim of this study was to evaluate the shear bond strength of repairs in porcelain conditioned with laser. Sixty porcelain discs were made and six groups were formed (n = 10): G1: conditioning with laser with potency 760 mW; G2: conditioning with laser with potency 760 mW and application of 37% phosphoric acid for 15 s; G3: conditioning with laser with potency 900 mW; G4: conditioning with laser with potency 900 mW and application of 37% phosphoric acid for 15 s; G5: application of 37% phosphoric acid for 15 s (group control) and G6: application of 10% hydrofluoric acid for 2 min. The composite resin was insert of incremental layers at the porcelain surface aided with a metal matrix, and photoactivation for 20 s each increment. The specimens were submitted to a thermal cycling by 1000 cycles of 30 s in each bath with temperature between 5 and 55°C. After the thermal cycling, specimens were submitted to the shear bond strength. The results were evaluated statistically through analysis of variance and Tukey's tests with 5% significance. The averages and standard deviation founded were: G1, 11.25 (±3.10); G2, 12.32 (±2.65); G3, 14.02 (±2.38); G4, 13.44 (±2,07); G5, 9.91 (±2,18); G6, 12.74 (±2.67). The results showed that the femtosecond laser produced a shear bond strength of repairs in porcelain equal to the hydrofluoric acid and significantly superior to the use of phosphoric acid.

The aim of this study was to compare the residual content of tetrasodium pyrophosphate released by two different anticalculus dental flosses (Reach PP® -entangled polypropylene floss and Reach NT® -texturized nylon) in the oral cavity. Ten healthy individuals (aged between 18 and 30 years) were enrolled in this randomized crossover clinical investigation. Participants received instructions on daily dental flossing and the interventions were randomly performed in 2 different groups (NT or PP) of five individuals each according to the dental flosses. Individuals were instructed to use each dental floss with a total of six slides on the two interproximal aspects of target teeth (3 slides on each interproximal aspect). A washout period of one week was used before start flossing interventions and after each type of dental floss to prevent any bias related to the exposure to any product that contained the active ingredient. Samples were collected by #35 sterilized absorbent paper points from interdental fluid after flossing and assessed by ion chromatography. The levels of residual tetrasodium pyrophosphate were evaluated by means of binomial generalized linear model proportions and canonical link function. Both dental flosses were effective in tetrasodium pyrophosphate release at therapeutic levels in the interdental gingival crevicular fluid for a period of up to 2 h after use. No significant differences were found between both groups (p>0.05). It may be concluded that both material composition and physical structure of the new dental floss did not affect the release or the maintenance of anticalculus agent at therapeutic levels for a period of up to 2 h after single use.