No abstract

No abstract

No abstract

Environmental management through effective utilization of biowastes has been a topic of intensive research in recent years. This study examines the effect of pyrolysis temperature on the physical and morphological characteristic of biochar (BC) derived from lignocellulosic wastes. The biochar was prepared by pyrolysing date palm biomass at various temperatures, i.e., 300, 400, 500, 600, and 700 °C. These pyrolysed biochars were then characterized for their carbon content, mineral compositions, chemical functionalities, and morphological structures, for understanding their physicochemical characteristics and microstructural evolution. It was revealed that the pyrolytic condition plays a key role in the formation of biochar microstructure. These biochar samples were then utilized without any further treatments/purifications for their practical application as reinforcement materials for polymer composites. They were blended with a polypropylene matrix by a melt mixing technique followed by injection molding process. The type of biochar was found to significantly affect the composites properties. Differences in microstructure, surface chemistry, and chemical compositions of BCs were observed to be determining factors affecting the compatibility and thermomechanical properties of resulted composites.

Conductive plastics are new generation functional materials with potential application in electronics, space and aviation industries. Polypropylene (PP) and polyethylene (PE) being most common, widely available and cheapest thermoplastic, if made conductive, can be revolutionary in the field of engineering thermoplastics. The article deals with the fabrication of electrically conductive PP and PE for electromagnetic interference/ radio frequency (EMI/RF) shielding applications and protection against electrostatic discharge (ESD). It reviews different fillers used by researchers to fabricate conductive PP and PE, several factors that affect the electrical conductivity of thermoplastic composites and various processing methods that can be adopted to prepare such composites. It exhaustively covers the preparation of such conductive composites, the processing methods involved therein, and the electrical properties of the end material. Emphasis has been given to comprehend the percolation threshold and means to reduce the latter in order to achieve high electrical conductivity in PP-and PE-based composites at relatively low filler loading. POLYM. COMPOS., 35:900-914,

No abstract

No abstract

No abstract