ABSTRAKDirect Methanol Fuel Cell (DMFC) merupakan jenis sel bahan bakar yang mengkonversi secara langsung metanol menjadi energi listrik. Kendala komersialisasi sel bahan bakar di Indonesia disebabkan oleh tingginya biaya manufaktur, termasuk diantaranya adalah mahalnya membran elektrolit yang merupakan salah satu komponen penting sel bahan bakar. Pemanfaatan material lokal yang murah dan melimpah seperti akrilonitril butadiena stirena (ABS) dan kitosan dapat mengurangi beban biaya manufaktur sel bahan bakar. Membran yang saat ini banyak digunakan untuk DMFC yaitu membran Nafion ® . Keunggulan membran Nafion ® memiliki konduktifitas ionik dan stabilitas membran yang tinggi, sedangkan kekurangan membran Nafion ® adalah harganya yang masih sangat mahal dan mempunyai permeabilitas metanol yang cukup tinggi sehingga dapat mengakibatkan penurunan kerja voltase sel keseluruhan. Penelitian ini mempelajari karakteristik membran komposit ABS-Kitosan tersulfonasi dengan rasio ( PENDAHULUANDMFC adalah tipe dari proton exchange membrane fuel cell (PEMFC) yang menggunakan metanol sebagai bahan bakar yang diumpankan secara langsung ke ruang anoda. Salah satu komponen penting dari DMFC adalah membran, yang berfungsi sebagai penghantar proton dari anoda menuju katoda dan juga sekaligus sebagai pemisah antara ruang anoda dan katoda. Membran yang secara komerisal digunakan saat ini adalah membran Nafion ® , namun, membran Nafion ® masih memiliki kekurangan yaitu harganya yang mahal dan terjadinya methanol crossover [1]. Oleh karena itu, pengembangan dan penelitian terhadap membran untuk aplikasi DMFC terus dilakukan agar permasalahan global berkenaan dengan energi dapat diselesaikan dengan solusi yang tepat dan ramah lingkungan yaitu dengan aplikasi DMFC.Untuk meningkatkan efektivitas membran sel bahan bakar dan menurunkan biaya produksi, beberapa membran hidrokarbon telah dikembangkan, diantaranya adalah polieter sulfon [2,3], polieter keton [4,5], akrilonitril butadiena stirena (ABS) [6,7]. Membran dari kelompok polimer alifatis atau aromatis ini memiliki kelebihan harganya yang murah, tersedia secara komersial, dan strukturnya memungkinkan mampu menyimpan kelembaban sehingga dapat beroperasi pada suhu yang lebih tinggi dibandingkan Nafion ® . ABS merupakan polimer material lokal sangat memungkinkan untuk dapat diaplikasikan dalam DMFC karena memiliki kestabilan kimia dan lebih murah dibanding Nafion ® . Agar dapat diaplikasikan dalam fuel cell, ABS harus dimodifikasi agar menjadi polimer yang bersifat hidrofilik. ABS mempunyai sifat yang tahan terhadap senyawa kimia dan kekuatan mekanis yang tinggi. Untuk meningkatkan sifat-sifat membran elektrolit seperti konduktivitas proton dan mengurangi permeabilitas metanol dilakukan penambahan kitosan yang merupakan biopolimer yang memiliki gugus fungsional amin (-NH2) yang memungkinkan untuk dimodifikasi secara fisika dan kimia [8]. Oleh karena itu, penelitian ini ditujukan untuk memodifikasi ABSkitosan dan mempelajari karakteristik membran yang dihasilkan seperti sifat water uptake, ...
The low cost of ABS polymer and natural polymer chitosan offer attractive chemical and physical properties for direct methanol fuel cells (DMFC). In this contribution, investigation of blend membrane made of ABS and chitosan, and their characterization for water uptake, swelling degree and ion exchange capacity (IEC) and methanol crossover are reported. This membrane was also assessed for its intermolecular interactions and thermal stability using FTIR and TGA compared to the pristine membrane. The water absorption and IEC values were affected by membrane network structure. The polymer blend had better thermal stability and a reduction of methanol permeability, this indicated the viability of utilization these materials as polymer electrolyte membrane in DMFC
A surface-active agent is a substance added to a liquid to increase its spreading properties by lowering the surface tension. On the other hand, an inducer is a substance to triggers the production of lipase enzymes from bacteria. This study aims to formulate the microbial growth medium to produce high activity of lipase through modification of surfactant type, glucose inducer concentrations, and mineral sources using Aspergillus niger as a microbial starter and rice bran as substrate. A solid fermentation was built and prepared in this study for lipase production. The titrimetric method using NaOH solution was used to determine mol of free fatty acids per minute, type of surfactant, the optimal glucose concentration, and mineral sources on lipase enzyme activity. Tween 80 and Tween 20 are lipid-based surfactants used in this experiment. The best type of surfactant was Tween 80 with 1% of glucose inducer. It produced a lipase activity of 2.53 U/mL. In contrast, Tween 20 with 0.75% glucose inducer produced a lipase activity of 2.27 U/mL. FeSO4 and CaCl2 were the inorganic mineral sources used in this study. The best result was found at 0.6% of FeSO4, it can generate enzyme activity of 2.13 U/mL.
Abstract. Direct Methanol Fuel Cell (DMFC) is fuel cell that converts directly chemical energy in methanol into electrical energy and can be used as a power source for portable electric devices. Compared to Proton Exchange Membrane Fuel Cells (PEMFCs) which use hydrogen as the fuel, DMFC has some advantages, yet methanol-crossover remains a challenge to be solved. In this study, Acrylonitrile Butadiene Styrene (ABS) and chitosan were blended and their characteristics as membrane for DMFC were evaluated. Membranes with variation of chitosan and ABS mass ratio (60:40 and 80:20) and sulfonation time (6, 12, 18, and 24 hours) were prepared and the characteristics such as water uptake, swelling degree, ion exchange capacity and methanol permeability were determined. Both chitosan and ABS mass ratio and time of sulfonation influence the investigated responses. As a result, blended chitosan and ABS is feasible as the DMFC membrane.
Silver nanoparticles have stable properties and potential applications especially as anti-microbial agents. The growth of fungi and bacteria on the wood surface can be inhibited by varnishing with silver nanoparticles. The nano-silver particles were prepared by synthesizing silver nitrate at concentration of 1, 3, and 5 mM with Moringa oleifera as a bioreductant. PVA (Polyvinyl Alcohol) as a stabilizer was varied at the levels of 0.5%, 1%, and 2%. In the UV-Vis test, the wave peaks are in the range 395-515 nm, this is in accordance with the characteristics of silver nanoparticles. The addition of 1% PVA to silver nanoparticles provided the best stability among the four concentrations provided by evidence of low maximum wavelength shift after storing. Particle size examination using the Particle Size Analyzer (PSA) showed silver nanoparticles had a size of 75.6 nm. Then the silver nanoparticle solution was applied to the resin varnish. The solution of silver nanoparticles has an effect on the antimicrobial properties of resin varnish, as evidenced by the absence of mold growth in the media with silver nanoparticles added. Abstrak Nanopartikel perak memiliki sifat yang stabil dan aplikasi yang potensial khususnya sebagai agen anti-mikroba. Pertumbuhan jamur dan bakteri pada permukaan kayu dapat dihambat dengan pernis yang diberi bahan nanopartikel perak. Partikel nano-perak dibuat melalui sintesis perak nitrat konsentrasi 1, 3, dan 5 mM dengan bioreduktor daun kelor (Moringa oleifera). PVA (Polivinil Alkohol) sebagai stabilsator divariasikan pada kadar 0,5, 1, dan 2%. Pada pengujian UV-Vis, puncak gelombang berada pada rentang 395-515 nm yang sesuai dengan karakteristik nanopartikel perak. Penambahan PVA 1% pada nanopartikel perak memberikan kestabilan paling baik diantara keempat konsentrasi karena pergeseran panjang gelombang maksimal yang rendah. Pemeriksaan ukuran partikel menggunakan Partikel Size Analyzer ( PSA ) menunjukkan nanopartikel perak memiliki ukuran 75,6 nm. Selanjutnya larutan nanopartikel perak tersebut diaplikasikan pada pernis damar. Larutan nanopartikel perak berpengaruh terhadap sifat anti mikroba pada pernis damar, dibuktikan dengan tidak tumbuhnya jamur pada media yang ditambahkan nanopartikel perak.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.