ÖzBu çalışmada, doğal anhidrit (CaSO 4 )'in beton karışımına değişik oranlarda eklenmesi ile oluşturulan beton örneklerinin fizikomekanik özellikleri değerlendirilmiştir. Hammadde olarak kullanılan doğal anhidrit Ulukışla (Niğde) bölgesinde yüzeyleyen Zeyvegediği anhidritinden; kırmataş agregası Karaisalı formasyonu (A. Miyosen) kireçtaşlarından derlenmiştir. Hazırlanan beton örnekleri tek eksenli basınç dayanımı ve ultrases hız deneylerine tabi tutulmuştur.Deney sonuçları beton karımı içinde mikronize edilmiş doğal anhidrit miktarı %27-42 aralığında iken beton dayanımının birbirine çok yakın en büyük değerlerine ulaştığını göstermektedir. Diğer taraftan %27-42 anhidrit içerik bandının dışına çıkıldığında dayanım değerleri ani olarak belirgin şekilde azalmaktadır.Beton örneklerinin ultrases hız değerleri ile doygun birim hacim ağırlıkları karşılaştırıldığında ters orantılı güçlü bir korelasyon ortaya çıkmaktadır. Bu sıra dışı durum 2,92 değerinde özgül ağırlığa sahip doğal anhidritin, beton karışımında kırmataş olarak kullanılan 2,72 özgül ağırlığındaki kireçtaşından daha küçük ultrases (UPV) değerine sahip olmasından kaynaklanmaktadır. Sonuçlar mikronize edilmiş doğal anhidritin betonda çimento gibi davranarak bağlayıcılık özelliği gösterdiğini ve belirli oranlarda kullanılması durumunda beton dayanımından önemli artışlar sağladığını ortaya koymaktadır.
Anahtar kelimeler: Doğal anhidrit, Beton, Dayanım ve ultrases hızı
Utilization of Natural Anhydrite as Concrete Component AbstractIn this study, the physicomechanical properties of concrete samples produced by adding of micronized natural anhydrite (CaSO 4 ) in various proportions to the concrete mix were evaluated.
This work is about the effect of fine aggregate properties on the physicomechanical characteristics of hardened mortars. The results indicated that the increase in grain-size of fine aggregate increases the bulk density of hardened mortars. The strength of mortars including limestone fine aggregate is higher than that of the silica-sand. Regardless of the aggregate origin, the strength of the mortars with well-graded fine aggregate for all grain-size is greater than of with uniform fine aggregate. This indicates that grading of fine aggregate increases the strength, while uniformity decreases it.The strength of mortars with well-graded fine aggregate increases as the grain-size increases. Regardless of the aggregate origin, the strength of mortars with uniform fine aggregate increases with increasing grain-size until the grain-size range of 425-1000 µm, but after this range it decreases with increasing grain-size. The thermal conductivity increases with the increase in the grain-size. Notedly, the relationship between thermal conductivity and maximum grain-size of well-graded fine aggregate has a very strong positive correlation. Further, the thermal conductivity value for mortars formed with uniform fine limestone aggregate is minimum at the grain-size range of 425-1000 µm, while it has greatest values close together from this grain-size range
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.