Carbonaceous solid (CS) catalysts with --SO₃H, --COOH, and phenolic --OH groups were prepared by incomplete hydrothermal carbonization of cellulose followed by either sulfonation with H₂SO₄ to give carbonaceous sulfonated solid (CSS) material or by both chemical activation with KOH and sulfonation to give activated carbonaceous sulfonated solid (a-CSS) material. The obtained carbon products (CS, CSS, and a-CSS) were amorphous; the CSS material had a small surface area (<0.5 m² g⁻¹) and a high --SO₃H group concentration (0.953 mmol g⁻¹), whereas the a-CSS material had a large surface area (514 m²  g ⁻¹) and a low --SO₃H group concentration (0.172 mmol g⁻¹). The prepared materials were evaluated as catalysts for the dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) in the ionic liquid 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). Remarkably high 5-HMF yields (83 %) could be obtained efficiently (80 °C and 10 min reaction time). CSS and a-CSS catalysts had similar catalytic activities and efficiencies for the conversion of fructose to 5-HMF in [BMIM][Cl]; this could be explained by the trade-off between --SO₃H group concentration (high for CSS) and surface area (high for a-CSS). The cellulose-derived catalysts and ionic liquid exhibited constant activity for five successive recycles, and thus, the methods developed provide a renewable strategy for biomass conversion.

No abstract

No abstract

Efficient amination strategies for synthesis of N-heterocycles from functional molecules (bottom-up) or from biomass (top-down) via sustainable C–N/C–X bond chemistry.

Nitrogen-containing compounds, especially primary amines, are vital building blocks in nature and industry. Herein, a protocol is developed that shows in situ formed N-formyl quasi-catalytic species afford highly selective synthesis of formamides or amines with controllable levels from a variety of aldehyde- and ketone-derived platform chemical substrates under solvent-free conditions. Up to 99% yields of mono-substituted formamides are obtained in 3 min. The C-N bond formation and N-formyl species are prevalent in the cascade reaction sequence. Kinetic and isotope labeling experiments explicitly demonstrate that the C-N bond is activated for subsequent hydrogenation, in which formic acid acts as acid catalyst, hydrogen donor and as N-formyl species source that stabilize amine intermediates elucidated with density functional theory. The protocol provides access to imides from aldehydes, ketones, carboxylic acids, and mixed-substrates, requires no special catalysts, solvents or techniques and provides new avenues for amination chemistry.

An efficient process was developed for the dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) in the ionic liquid (IL) 1-butyl-3-methyl imidazolium chloride ([BMIM][Cl]) by using sulfated zirconia as catalyst. A fructose conversion of 95.8% with a 5-HMF yield of 88.4% was achieved in 30 min reaction time at 100 °C. The IL and sulfated zirconia could be recycled and exhibited constant activity for 6 successive trials, and 5-HMF yields of above 60% could be kept up to 10 trials. The proposed process of using an IL with sulfated zirconia solid catalyst greatly reduces the reaction temperature required over previous works for converting fructose to 5-HMF.

No abstract

No abstract