Friction and wear are ubiquitous, from nano-electro-mechanical systems in biomedicine to large-scale integrated electric propulsion in aircraft carriers. Applications of nanomaterials as lubricating oil additives have achieved great advances, which are of great significance to control friction and wear. This review focuses on the applications of nanomaterials in lubricating oil and comprehensively compares their tribological characteristics as lubricating oil additives. Statistical analysis of tribology data is provided and discussed accordingly; moreover, the interaction between nanomaterials and sliding surface, lubricating oil, other additives, and synergistic lubrication in nanocomposites are systematically elaborated. Finally, suggestions for future research on nanomaterials as lubricating oil additives are proposed. Hence, this review will promote a better fundamental understanding of nanomaterials for lubricating oil application and help to achieve the superior design of nanoadditives with outstanding tribological performances.

The shock waves and micro-jets generated during the process of bubble collapse leads to cavitation damage for the materials surface of the hydraulic machinery equipment parts, which need to be...

No abstract

Several civilian vehicles in China operate in urban traffic conditions and have their motor oil changed every 5,000 km. This study investigates the variations in oil properties after servicing at 5,000 km, based on systematic road tests (including a repeated test, a parallel test, and a new vehicle test). The physicochemical properties, changes in components, oxidation stability, detergent-dispersant performance, and tribological properties of motor oils were analyzed. The results showed that the total acid number (TAN) of oils increased with the operation mileage, by up to 1.41 mgKOH/g. The total base number (TBN) decreased after the road tests were completed, and the decrease was less than 44.6%. The kinematic viscosity (KV) of most oils decreased initially and then stabilized in the middle stage, before starting to increase later in the experiment. The change in KV at 100 ℃ was less than 15.96%. The oxidation onset temperature (OOT) of the oils diminished gradually with the operation mileage. All OOT values of the used oils were higher than 210 ℃. A spot test indicated that the used oils retained their detergentdispersant performance to an appropriate extent. The four-ball wear scar diameters and friction coefficient of the used oils did not increase significantly after the road tests were completed. This study can serve as a reference for end-users when changing motor oils.

No abstract