Size effect is a special phenomenon in metal micro-forming process. As the deformation process is scale down to micro/mesoscale, the characteristics of single grain involved in the deformed region play a significant role on the material mechanical behaviours resulting in the invalidation of classical theories in microforming. This paper presents a newly developed material model in microscale on the basis of the grained heterogeneity (e.g. grain size, shape and deformability) and specimen dimension. Voronoi tessellation has been employed to describe the polycrystalline aggregate. The grain shape is controlled by the centroidal-voronoi algorithm to drive grains into steady state. Hardness of the grains obtained from Nano-indentation is used to identify the scatter of the grained deformability. Applying the new material model, the micro-compression test of pure copper is numerically simulated by finite element method (FEM). The influences of grain size and feature size on the deformation behaviours are discussed. The numerical simulation results are in good agreement with the experimental results in terms of the flow stress curves and profile of deformed parts. Based on the novel material model, a FE model of microcross wedge rolling is established and the obtained results show the strain of specimen core region increases with the magnification of grain size. © 2013 Elsevier B.V. All rights reserved. AbstractSize effect is a special phenomenon in metal micro-forming process. As the deformation process is scale down to micro/meso scale, the characteristics of single grain involved in the deformed region play a significant role on the material mechanical behaviours resulting in the invalidation of classical theories in microforming. This paper presents a newly developed material model in micro scale on the basis of the grained heterogeneity (e.g. grain size, shape and deformability) and specimen dimension. Voronoi tessellation has been employed to describe the polycrystalline aggregate. The grain shape is controlled by the centroidal-voronoi algorithm to drive grains into steady state. Hardness of the grains obtained from Nano-indentation is used to identify the scatter of the grained deformability. Applying the new material model, the micro-compression test of pure copper is numerically simulated by finite element method (FEM). The influences of grain size and feature size on the deformation behaviours are discussed. The numerical simulation results are in good agreement with the experimental results in terms of the flow stress curves and profile of deformed parts. Based on the novel material model, a FE model of micro cross wedge rolling is established and the obtained results show the strain of specimen core region increases with the magnification of grain size.
This paper shows an analytical, numerical and experimental investigation to comprehend the role of grained inhomogeneity which plays in micro flexible rolling in terms of the average rolling force and the thickness directional springback of the workpiece after it exits the roll bite zone. Miniature tensile tests and micro hardness tests are accomplished to identify the scattered stress-strain curves for 500 ¿m thick aluminium alloy 1060 samples with grain size of approximately 23-71 µm and to determine the weighted heterogeneity coefficient for each sample separately, according to which the theoretical calculations and numerical simulations based upon 3D Voronoi tessellation technique have been performed under actual experimental conditions where reductions of 25 to 50 % are selected. The scattering effect associated with the anisotropic nature of single grains has been perceived in the micro flexible rolling process and both the analytical and finite element models developed have been validated via experimental data to hold promise for predicting the rolling force and the thickness directional springback of the workpiece, as well as boosting the thickness profile control performance of the micro flexible rolling mill.
This paper establishes a finite element model to numerically study the springback in thickness direction during micro flexible rolling process, in which 3D Voronoi tessellation has been applied to describe grain boundary and generation process of grain in the workpiece. To reflect material heterogeneity, nine kinds of mechanical properties defined by nine types of heterogeneity coefficients are selected and assigned to Voronoi polyhedrons as per the statistical distribution of hardness of grains identified by micro hardness testing. Initial workpiece thicknesses of 100, 250 and 500 μm with reduction changing from 20% to 50% are respectively considered in the numerical simulation of micro flexible rolling process, and the effects of front and back tensions on the average springback have been discussed. With average grain sizes of 1, 10, 50, 100 and 250 μm respectively employed in the workpieces with the aforesaid initial thicknesses, the scatter of springback in thickness direction has been determined, and a model for springback has also been developed based on the simulation results. Analysis of micro flexible rolling with consideration of material heterogeneityAbstract: This paper establishes a finite element model to numerically study the springback in thickness direction during micro flexible rolling process, in which 3D Voronoi tessellation has been applied to describe grain boundary and generation process of grain in the blankworkpiece. To reflect material heterogeneity, nine kinds of mechanical properties defined by nine types of heterogeneity coefficients are selected and assigned to Voronoi polyhedrons as per the statistical distribution of hardness of grains identified by micro hardness testing. Initial blank thicknesses of 100, 250 and 500 m with reductions changingof from 20 toand 50% respectively are respectively considered in the numerical simulation of micro flexible rolling process. With grain sizes of 1, 10, 50, 100 and 250 m respectively employed in the workpieceblank, the scatter of springback in thickness direction has been determined, and a model for springback has also been developed based on the simulation results.
This paper investigated the influences of temperature and grain size on the deformability of pure copper in micro compression process. Based on the dislocation theory, a constitutive model was proposed taking into account the influences of forming temperature, Hall-Petch relationship and surface layer model. Vacuum heat treatment was employed to obtain various grain sizes of cylindrical workpieces, and then laser heating method was applied to heat workpieces during microforming process. Finite element (FE) simulation was also performed, with simulated values agreed well with the experimental results in terms of metal flow stress. Both the FE simulated and experimental results indicate that forming temperature and grain size have a significant influence on the accuracy of the produced product shape and metal flow behaviour in microforming due to the inhomogeneity within the deformed material. The mechanical behaviour of the material is found to be more sensitive to forming temperature when the workpieces are constituted of fine grains. experimental results indicate that forming temperature and grain size have a significant influence on the accuracy of the produced product shape and metal flow behaviour in microforming due to the inhomogeneity within the deformed material. The mechanical behaviour of the material is found to be more sensitive to forming temperature when the workpieces are constituted of fine grains.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.