Alloyed high manganese steel is a general type of wear-resistant steel, and its precipitates and austenite matrix grain sizes play an important role in impact abrasive wear behavior. Solid-solution treatment is an effective method to balance the size of the austenite grains and precipitates. This work attempts to find a new progressive solid-solution treatment to make alloyed high manganese steel castings refine the microstructure and balance the wear resistance under impact abrasive wear conditions. Compared with traditional solid-solution treatment, the MC- and M23C6-type carbide precipitates resulting from progressive solid-solution treatment decrease, and the tensile strength and impact toughness of steel are significantly increased. After the solid-solution treatment at different heating rates, the grain refinement effect is remarkable after shortening the holding time at 1100 ℃ and increasing the heating rate to 150 ℃/h. The impact abrasive wear test results show that, compared with the traditional solid-solution treatment at 1100 ℃ for 4 h, the wear resistance of high manganese steel has a 23.1% improvement after progressive solution treatment at 1100 ℃ for 2 h, and the wear failure forms of all the experimental steels are microcutting, oxidation wear and plastic deformation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.