Tribological investigations had been carried out on the plasma coating (Al2O3+ ZrO2) below dry and moist abrasion stipulations according to ASTM G134. Commercial motor oil 20W40 was used as a lubricant. At a rotational speed of 200 rpm, all experiments were carried out with ordinary loads of 10, 15 and 20 Nm. Electron microscopy for scanning and AFM was used to study of the layer sprayed with paint. The outcomes of the SEM and AFM evaluation confirmed that abrasive wear is normally decided by abrasive wear in dry abrasive conditions. The lubrication and moisture check confirmed a major reduce in wear from 10 to 15 N below regular loading, and a corrosion fee larger than 15 N was once discovered below regular loading. No impact of lubrication on wear used to discovered at high loading. No impact of lubrication on wear used to be discovered at high loads. It was also cited that the plasma coating manner to improve wear resistance. The experimental statistics acquired in this study are tremendous engineering functions such as reducing equipment and internal combustion engines.
The air conditioning system for the Mall A building in Jakarta uses a central air conditioning system with a constant flow chiller with TES (Thermal Energy Storage). This system will be verified by measuring data regarding cooling load of the Mall A. The peak cooling load measurement results is 12,299 kW with a total cooling load of 45,733,180 kWh for 1 year. The result of the measurement data will be compared to cooling load calculation by Trace 700 software. Based on Trace 700 software, the peak cooling load is 12,594 kW with a total cooling load of 44,617,405 kWh. Furthermore, using the actual measurement data of the air conditioning system in Mall A, it will be compared with a central air conditioning system with a magnetic bearing chiller which will be equipped with VSD (Variable Speed Drive) to find out how well its energy performance and costs are for a mall building similar to Mall A, as a potential for energy and cost savings. The results of energy calculations and cost analysis, the central air conditioning system with the magnetic bearing chiller is 99 kWh/(m2.year) and the life cycle costs for 20 years, 30 years, and 50 years are 339,828,248,242 IDR, 415,994,136,400 IDR, 521,915,598,761 IDR. While the results of energy calculations and cost analysis, the TES combination constant flow chiller central air conditioning system is 141 kWh/(m2.year) and the life cycle costs for 20 years, 30 years, and 50 years are 435,150,140,059 IDR, 541,700,386,487 IDR, 690,535,151,478 IDR. Based on the foregoing, the central air conditioning system with variable flow magnetic bearing chiller is a better system than the central air conditioning system with TES combination constant flow chiller for shopping mall buildings similar to Mall A.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.