Friction stir processing (FSP) technology has received reasonable attention in the past two decades to process a wide range of materials such as aluminum, magnesium, titanium, steel, and superalloys. Due to its thermomechanical processing nature, FSP is used to alter grain structure and enhance mechanical and corrosion behavior in a wide range of steels. The refinement in grains and phase transformations achieved in steel after FSP affects hardness, tensile properties, fracture toughness, fatigue crack propagation rate, wear resistance, and corrosion resistance. A number of review papers are available on friction stir welding (FSW) or FSP of nonferrous alloys. In this article, a comprehensive literature review on the FSP/FSW of different types of steels is summarized. Specifically, the influence of friction stir processing parameters such as advancing speed, rotational speed, tool material, etc., on steels’ performance is discussed along with assessment methodologies and recommendations.

Duplex stainless steel (DSS) is used for desalination equipment, pressure vessels, marine applications, offshore applications, and in oil/gas plants where a highly corrosive environment is present. Super duplex stainless steel (SDSS) 2507 has excellent mechanical properties, such as high strength, high toughness, high fatigue life, and high corrosion resistance. Friction stir processing (FSP) is used to refine the grain structure of the processed region such that properties like strength, hardness, fracture toughness, fatigue life, and corrosion resistance are enhanced. In this paper, an optimized friction stir process of 2507 SDSS is carried out to refine the microstructure of the material in order to improve its mechanical properties. Microstructure analysis revealed that grains were refined from a size of around 160 µm in the base material to 2–30 µm in the processed zone. This grain size reduction resulted in improved strength, hardness, and fracture toughness of the material by up to 14%, 11%, and 12%, respectively. However, FSP has reduced the fracture strain by about 30%.

No abstract