WHO estimates that the global number of tobacco users exceeds 1.3 billion people. Few studies have examined the effect of locally made smokeless tobacco (ST) products on the color changes of material used in dental prosthetics. Bearing the recent advances in CAD/CAM ceramic restorations material in mind, this study aimed to assess ST influence on mean color change (∆E*) values among selected CAD/CAM ceramic types: multilayer zirconia (Ceramill Zolid PS), zirconia-reinforced lithium silicate ceramic (Vita Suprinity), and feldspathic (Vita TriLuxe) restorative materials. The color changes of the ceramics were compared to VITA classical and VITA 3D-MASTER shade guides. Sixty CAD/CAM ceramic specimens (20 samples each) were fabricated from Ceramill Zolid PS, Vita TriLuxe Forte, and VITA Suprinity. Specimens were prepared and divided into two groups according to the ST type and immersed for two weeks. Basic VITA classical and VITA 3D-MASTER colors were recorded at a baseline of one week and two weeks. The highest ∆E* values were recorded in the black ST for Vita Suprinity (4.77) in the first week, followed by Vita TriLuxe (4.07) in the second week. For white ST, Vita TriLuxe (4.87), and Vita Suprinity (4.42) showed extensive color change after two weeks and one week, respectively. The color change was least in zirconia for black and white ST after one week. CAD/CAM ceramic materials showed no significant difference after 1 and 2 weeks for the tested ST types. The effects of ST on CAD/CAM ceramic material (∆E* values) were high but did not reach clinically unacceptable values. Zirconia showed the least amount of color change among all the tested materials.

Background This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. Material/Methods Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee. Color of specimens was measured during immersion in staining materials (BEFORE) as baseline with (Vita classic) and (L, a, b), for average color changes (ΔE 00 ), then remeasured after 2, 4, and 12 weeks, and described as 1 st , 2 nd , and 3 rd measurements for VITAPAN Classic shade and T1, T2, and T3 for ΔE 00 values using the CIE L*a*b* equation. We performed ANOVA and then post hoc testing. Results We found significant differences in ΔE 00 values during immersing in hot Arabic Qahwa and cold coffee for tested materials in glazed or polished specimens. Polished specimens of Vita-S and Vita-E had the highest color changing and staining compared to glazed surfaces. Vitablocs-MII had the best color stability through immersion periods. Moreover, there were changes in relation to VITAPAN Classic shade guide for both Vita-S and Vita-E specimens during different immersion periods. Conclusions Coffee caused staining and contamination of ceramic material. Values of ΔE 00 for tested ceramic materials were significantly different but were within the clinically acceptable range. Polished specimens showed higher staining; therefore, we highly recommend re-glazing of ceramic restorations to maintain color stability.

No abstract

The aim of this study was to evaluate if adhesion technology with CAD/CAM can compensate for the reduction of occluso cervical preparation heights using different types of dental cement. The de-bonding failure types were then assessed. Here, 72 caries-free extracted human premolar teeth were prepared to have a remaining occlusal height of two, three, and four mm. IPS e.max lithium disilicate CAD/CAM crowns were cemented with adhesive resin cement Panavia SA, self-adhesive resin cement, RelyX Unicem Aplicap, and zinc phosphate cement. The cementation techniques were based on the manufacturer’s instructions. After thermocycling, all samples were tested for tensile bond strength via an Instron machine. One-way analysis of variance (ANOVA) with post hoc testing (P < 0.05) was performed. The means TBS for the two, three, and four-mm OCHP groups were 2.72±0.69, 3.06±0.82, and 3.25±0.79.0 MPa; ARC, SARC, and ZPC were 3.41±0.51, 3.45±0.41, 2.08±0.35 MPa, respectively with significant differences in both. The mixed cement had failures in the resin cement groups. Failure was predominantly cohesive in the zinc phosphate group. Resin cement had the highest SBS values versus ZPC values when both bonded to lithium disilicate crowns with different occlusal heights. The failure of the adhesive to the crown and/or to the tooth were the highest for the four types of resin cement. Around 25% were cohesive failures with resin cement, but this was predominately adhesive in crowns in zinc phosphate regardless of the preparation heights.

No abstract

No abstract

No abstract

The study aims to systematically review the available literature to evaluate the changes in oral microbiota in patients after bariatric surgery (BS) and correlates these alterations in microorganisms with common oral manifestations. Relevant Electronic databases were systematically searched for indexed English literature. The Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines were followed for framework designing, application, and reporting of the current systematic review. The focused PICO question was: “Is there any change in oral microbiota (O) of patients (P) who underwent BS (I) when compared with non-BS groups (C)?' Seven articles were selected for qualitative synthesis. On application of the National Institutes of Health (NIH) quality assessment tool, six studies were found to be of fair quality and one was of good quality. All the seven included studies evaluated the effect of BS on oral microbiota in humans. The outcomes of this review suggest that considerable changes take place in oral microbiota after BS which can be correlated with common oral manifestations. These changes are mainly due to the indirect effect of BS and may vary with the individuals. Due to variations in the included studies, it is difficult to proclaim any persistent pattern of oral microbiota found after BS.