Abstract. Stimulated electromagnetic emission (SEE) produced by interactions ofhigh-power radio waves with the Earth's ionosphere is currently a topic of significant interest in ionospheric modification physics. SEE is believed to be produced by nonlinear wave-wave interactions involving the electromagnetic and electrostatic plasma waves in the altitude region where the pump wave frequency is near the upper hybrid resonance frequency. The most prominent upshifted feature in the SEE spectrum is the broad upshifted maximum (BUM). From characteristics of this feature, a four-wave parametric decay process has been proposed as a viable mechanism for its production. The object of this work is to (1) investigate the early time nonlinear development of the four-wave decay instability by using theoretical and numerical simulation models, (2) study the variation of the four-wave decay instability spectral features for a wide range of plasma and pump wave parameters, and (3) access its possible role in the production of the BUM spectral feature. Results of this investigation show that there is good agreement between predictions of the proposed theoretical model and the numerical simulation experiments.The simulation electric field power spectrum exhibits many of the important features of the experimental observations. The numerical simulation results show that consideration of the full nonlinear development of the four-wave parametric instability is crucial in providing insight into the asymmetric nature of the wave frequency spectrum observed during the experiments.

No abstract

A pulse current generator applied in a type of high-yield intense pulsed neutron source, the Dense Plasma Focus (DPF), is designed and developed in this paper. There are three key components in this generator. Each group of capacitors and switches is integrative to meet the DPF's requirements of low circuit inductance. A coaxial multi-channel switch is developed to solve the problems of the switch inductance, the jitter and the electrode erosion. A kind of sectorial plate transmission line is adopted to transfer the high pulse current from the capacitors to the DPF. The following technical parameters of the generator were achieved on dummy load: output current amplitude of ∼560 kA when primary capacitors are charged with 22 kV.