Aims. This paper describes the Heterodyne Instrument for the Far-Infrared (HIFI) that was launched onboard ESA's Herschel Space Observatory in May 2009. Methods. The instrument is a set of 7 heterodyne receivers that are electronically tuneable, covering 480−1250 GHz with SIS mixers and the 1410−1910 GHz range with hot electron bolometer (HEB) mixers. The local oscillator (LO) subsystem comprises a Ka-band synthesizer followed by 14 chains of frequency multipliers and 2 chains for each frequency band. A pair of auto-correlators and a pair of acousto-optical spectrometers process the two IF signals from the dual-polarization, single-pixel front-ends to provide instantaneous frequency coverage of 2 × 4 GHz, with a set of resolutions (125 kHz to 1 MHz) that are better than 0.1 km s −1 . Results. After a successful qualification and a pre-launch TB/TV test program, the flight instrument is now in-orbit and completed successfully the commissioning and performance verification phase. The in-orbit performance of the receivers matches the pre-launch sensitivities. We also report on the in-orbit performance of the receivers and some first results of HIFI's operations.

No abstract

No abstract

An integrated quasioptical receiver consisting of a planar double dipole antenna, superconductor-insulator-superconductor mixer and a superconducting local oscillator (LO) with matching circuits has been designed, fabricated and tested in the frequency range 360–490 GHz. A flux-flow oscillator (FFO) based on unidirectional and viscous flow of magnetic vortexes in a long Josephson tunnel junction, is employed as a local oscillator. All components of the receiver are integrated on a 4 mm×4 mm×0.2 mm crystalline quartz substrate using a single Nb–AlOx–Nb trilayer. The lowest DSB noise temperature of 470–560 K has been achieved within a frequency range of 425–455 GHz.

No abstract