Peripheral such as aerospace, armor, sensors, heat exchanger, automobile, storage, and any other electronic equipment are frequently subjected to varying mechanical and thermal stress, which substantially influence their reliability, life cycle, and performance. The aerospace sector, for example, is in constant research for the decrement in mass to achieve higher fuel efficiency through light weighting approach. It is due to the specific parameters that advanced polymer composites exhibit, there are growing research interests in heat management schemes, where both higher thermal characteristics and strength with significantly lower density are simultaneously essential. In the same manner, nanohybrid particles are commonly utilized as reinforcement fillers to enhance mechanical, electromagnetic shielding efficiency, and thermal characteristics of any polymer matrices. This survey discusses the polymer-based nanocomposites incorporated with hybrid nanoparticles for applications in high-performance materials. The subsequent interaction between the selected polymer matrix and hybrid nanofillers, which affects the characteristics of the polymer-based nanocomposites: mechanical, electromagnetic radiation shielding efficiency as well as thermal conductivity have been critically reviewed. The hybrid nanoparticles' synergy facilitates effective dispersion without damaging the structures of the nanofillers tend to optimized electrical properties, thermal conductivity, and higher overall functionality of the fabricated nanocomposites.

No abstract

No abstract

In recent years, the revolutionary utilization of plant fibers in polymer laminates significantly influenced environmental effects. Presently, there is progression attention in advancing bio-based materials by acquiring plant fibers from lignocellulosic components for different applications like non-structural, structural laminates, automobile components, ballistics, flooring, household utensils, and aerospace parts. These bio-based, eco-friendly components have been recognized as next-generation contestants for higher-efficacy, sustainable, cheap, environmentally friendly, and lightweight composites. Different kinds of synthetic and natural biopolymers and bio-based nanoparticles have been applied to produce sustainable materials. Bio-based polymer composites manifest unique characteristics of both eco-reinforcement and sustainable resin. This review comprehensively communicates the general characteristics and principles of nanoparticles, polymers, and their respective composites. In addition to the machining characteristics, challenges and future perspectives of the polymer composites have also been reviewed.

No abstract

This review article discusses the environmental and economic effects of recycling, as well as sustainable thermoplastic polymer recycling technologies. Several researchers have utilized recycled thermoplastics as matrices in the production of a variety of natural and synthetic‐based composites, which is also the focus of this study. All of the industries (food and packaging, construction and building, transportation, and indoor usage) where recycled thermoplastics have a large market share (food and packaging, construction and building, transportation, and indoor usage) are covered in this review. The desirable properties of thermoplastic polymers, such as corrosion resistance, low density, and user‐friendliness, have caused plastic production to surpass aluminum and other metals in use over the past 60 years. Furthermore, recycling is one of the most important measures available to mitigate these effects and is one of the most dynamic segments of the plastics industry at present. Increased landfilling and incineration of plastics have a negative impact on the ecosystem, and the continued increase in the production of virgin fossil plastic also has a negative impact on the environment. Consequently, this continuous production could lead to the depletion of fossil fuel resources, an increase in environmental emissions during processing, and eventual incineration. Increasing numbers of nations are adopting the circular economy concept in an effort to avoid all of these problems. This concept emphasizes the reuse of products and resources, as well as the recycling of materials according to the waste hierarchy, rather than their cremation or disposal in the environment.

In the present study, the reinforcing effect of aluminum silicon carbide (Al‐SiC) nanoparticles and chemically treated nanocellulose fiber on thermomechanical and corrosion characteristics of polymer nanocomposites have been investigated. The experimental design was selected as per response surface methodology (RSM) to optimize the effect of Al‐SiC (1.59 to 18.41 wt%), nanocellulose fiber concentration (1.59 to 18.41 wt%) and sonication time (39.55 to 140.45 minutes). From the analysis of variance (ANOVA) results, it was found that the Al‐SiC, nanocellulose fiber concentration and sonication time played a significant role in the mechanical properties. In order to simultaneously maximize the flexural strength, the optimal values of nanocellulose fiber, Al‐SiC nanoparticles, and sonication time was found to be 5 wt%, 5 wt%, and 120 minutes, respectively. From the normal distribution plot, it is found that there is a good agreement between experimental results and developed RSM model. Addition of Al‐SiC (5 wt%) and nanocellulose fiber (5 wt%) in epoxy polymer improved the physical, mechanical, thermal and corrosion resistance properties. The scanning electron microscope analysis on Al‐SiC and nanocellulose fiber reinforced epoxy nanocomposites revealed uniform dispersion of nanocellulose fiber and Al‐SiC in the polymer matrix, which caused for the improved mechanical, and corrosion resistance characteristics.

Fiber‐reinforced composites have found their prominent place in various applications, including aerospace, automobile and marine manufacturing industries, because of outstanding properties obtained during composite preparation. One such aspect of improving the composite property is hybridization, where natural fibers (or both natural and synthetic fibers) are combined to obtain different composite structures for diverse applications. This research aims to hybridize the composite considering Kenaf fabric and Kevlar fabric reinforced in an unsaturated polyester matrix with different proportions. Three different laminate sequences (L1, L2, and L3) were developed by considering the fabric's stacking sequence, weave pattern, and orientation. The composite laminates prepared were tested where Taguchi's method (L9 orthogonal array) and artificial neural network were used to study influencing parameters for tribological behavior of the composite. From the practical information, a prediction model from the artificial neural network is applied to forecast the wear rate of the laminates at a broader range of operating factors beyond and within the test phase. The microstructures of the worn surfaces were investigated from a scanning electron microscope to confirm the wear principle of the laminates under different cases.