The Lunar orbiter is expected to be inserted into a~300km low Earth orbit using Korea Space Launch Vehicle-Ⅱ(KSLV-Ⅱ). After the states are successfully determined with obtained tracking data, the Trans Lunar Injection(TLI) burn has to be done at appropriate epoch to send the lunar orbiter to the Moon. In this study, we describe in detail the mission scenario of the Korean lunar orbiter from the launch at NARO Space Center to lunar orbit insertion(LOI) stage following direct transfer trajectory. We investigate the launch window including launch azimuth, delta-V profile according to TLI and LOI burn positions. We also depict the visibility conditions of ground stations and solar eclipse duration to understand the characteristics of the direct transfer trajectory. This paper can be also helpful not only for overall understanding of trend by changing TOF and coasting time but for selecting launch epoch and control parameters to decrease fuel consumption.
The second-generation star tracker estimates pointing knowledge of a satellite without a-priori knowledge. But star trackers are larger in size, heavier, power hungry and expensive for nanosatellite missions. The Arcsecond Pico Star Tracker (APST) is designed based on the limitations of nanosatellites and estimated to provide pointing knowledge in an arcsecond. The APST will be used on the SNUSAT-2, Earth-observing nanosatellite. This paper describes the requirements of APST, trade-off for the selection of image sensor, optics, and baffle design. In addition, a survey of algorithms for star trackers and a comparison of the specifications of APST with other Pico star trackers are detailed. The field of view (FOV) estimation shows that 17°and 22°are suitable for APST and this reduces stray light problems. To achieve the 100% sky coverage, the FOV of 17°and 22°should able to detect the 5.85 and 5.35 visual magnitude of stars, respectively. It is validated by estimating the signal to noise ratio of APST and night sky test results. The maximum earth stray light angle is estimated to be 68°and a miniaturized baffle is designed with the exclusion angle of 27°.
In order to accelerate the evolution of faster, better, cheaper spacecraft, it is evident that greatly enhanced general-purpose attitude determination methods are needed Currently, star tracker sensors based on charge coupled devices (CCD) or active pixel sensors(APS) enable one to obtain the best spacecraft attitude estimation among the existing sensors for attitude determination. In this paper, basic principles of star tracker technology are explained including major issues arising in design and development of star tracker. Also, an historical overview and worldwide survey associated with various star trackers from star scanner through microelectromechanical system(MEMS)-based star tracker is offered.
We describe an analytical, computational, and experimental study designed to gain the insights needed for a third generation star tracker and realtime attitude determination system. Novel features include some refinements of methods for preliminary and final attitude estimation, and star catalog design and real-time access. We summarize analysis, computation,. design, and ground validation of hardware and software.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.