De forma geral, diversos materiais entre eles poliméricos, cerâmicos e metálicos, podem apresentar propriedades de memória de forma. O efeito memória de forma é a propriedade onde os materiais apresentam uma “memória” de sua forma, ou seja, apresentam a capacidade de retornar a sua forma inicial após sofrer algum tipo de deformação, entretanto, esse efeito depende da aplicação de um estimulo externo para que o retorno aconteça, como o calor, eletricidade, luz, entre outros. Esses materiais são classificados como materiais inteligentes, pois apresentam propriedades que respondem a um estimulo externo de ordem química, física ou biológica. Este trabalho pretende realizar uma revisão da literatura sobre polímeros com memória de forma, abordando suas características gerais, teorias termomecânicas, mecanismos de ativação e aplicações. Deste modo, deseja-se divulgar a temática pouco discutida no Brasil, contribuindo para o desenvolvimento de novas tecnologias e síntese de polímeros com memória de forma.
Resumo: O objetivo deste trabalho foi a purificação e organofilização em escala piloto de dois tipos de argila bentonita (cinza e verde) com tensoativo não iônico e a aplicação destas argilas em nanocompósitos com matriz de Polipropileno (PP). As argilas foram purificadas e em seguida organicamente modificadas com tensoativo não iônico tornandose organofílicas, sendo denominadas de CPO e VPO respectivamente, e caracterizadas por Análise Granulométrica por Difração a Laser (AG), análise química por Fluorescência de Raios X (EDX), Difração de Raios X (DRX) e espectroscopia no infravermelho (IV). Os resultados de AG e EDX mostraram redução significativa do teor de areia e da sílica livre na forma de quartzo confirmando que houve a purificação da argila. Os resultados de DRX e IV mostraram que a organofilização em escala piloto das argilas foi realizada com sucesso. Os compósitos contendo 3pcr de argila foram caracterizados por DRX, Calorimetria exploratória diferencial (DSC), Termogravimetria (TG) e propriedades mecânicas. As análises por DRX indicaram formação de um nanocompósito com estrutura intercalada para o sistema PP/E-GMA/CPO, enquanto para o sistema PP/E-GMA/VPO formou-se um micro-compósito. Os resultados de DSC indicaram que as argilas não influenciaram na temperatura de fusão do PP. Os resultados de TG indicaram que as argilas CPO e VPO melhoraram a estabilidade térmica do PP. O sistema PP/E-GMA/CPO foi o que apresentou maior estabilidade térmica e maior módulo. As resistências à tração e ao impacto dos compósitos não apresentaram melhora significativa em relação ao PP puro. Mesmo assim, este comportamento é importante uma vez que as propriedades mecânicas do PP não foram deterioradas. Palavras-chave: Nanocompósitos, organofilização, tensoativo não iônico, argila purificada. Purification and Organophilization in Pilot Scale of Bentonitic Clays with a Non-ionic Surfactant and their Application in Polymer NanocompositesAbstract: The aim of this work was the purification and organophilization on a pilot scale of two types of bentonite clay (green and grey) with nonionic surfactant, and their application in nanocomposites with a Polypropylene (PP) matrix. The bentonitic clays were purified and then organically modified with a non-ionic surfactant to become organophilic, being referred to as CPO and VPO respectively, and characterized by Particle Size Analysis by Laser Diffraction (AG), chemical analysis by X-Ray Fluorescence (EDX), X-ray diffraction (XRD) and infrared spectroscopy (IR). The results of AG and EDX showed significant reduction in the amount of sand and free silica in the form of quartz confirming that the clay was purified. The results of XRD and IR showed that the organophilization on pilot scale of the clays was successful. The composites containing 3phr of clay were characterized by XRD, differential scanning calorimetry (DSC), thermogravimetry (TG) and mechanical properties. XRD results indicated that for the PP/E-GMA/CPO system a nanocomposite with an intercalated structure was formed. As ...
In this study, polylactide/ethylene-glycidyl methacrylate (PLA/E-GMA) binary blends were prepared via melt blending to investigate their potential for 4D printing. The aim was to enhance shape memory effects and dynamic responses in the printed objects by exploring different compositions, printing parameters, and temporary shapes. Several characterizations were performed, including Fourier transform infrared spectroscopy (FTIR), rheological properties, dynamic mechanical analysis (DMTA), scanning electron microscopy (SEM), impact strength tests, optical microscopy, and evaluation of the shape memory effect. The results revealed the successful incorporation of elastomers into the PLA matrix, as confirmed by the chemical reactivity of the PLA/E-GMA blends. The materials showed good processability and printability based on the rheological properties. DMTA analysis demonstrated improved mechanical properties and shape memory behavior in the PLA/E-GMA samples. SEM images exhibited well-dispersed elastomer particles and enhanced interfacial adhesion between the phases. The evaluation of the shape memory effect showed that the printed objects could recover their original shape upon stimulation. Optical microscopy confirmed the influence of printing parameters on layer adhesion. The PLA/E-GMA (50/50) composition was selected for filament production, resulting in a high-quality filament with suitable dimensions and good printability. Overall, the incorporation of elastomers into PLA enhanced the shape memory effect and mechanical properties of the printed objects. This research contributes to the advancement of 4D printing using PLA-based materials and opens possibilities for dynamic and responsive structures in various fields.

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.