Vitrimeric materials have emerged as fascinating and sustainable materials owing to their malleability, reprocessability, and recyclability. Sustainable vitrimeric materials can be prepared by reinforcing polymeric matrix with bioderived fillers. In the current work, a sustainable vitrimer is prepared by incorporating biomass-derived activated carbon (AC) filler into the epoxy matrix to achieve enhanced thermal and mechanical properties. Thus, prepared biocomposite vitrimers demonstrate a lower-temperature self-healing (70°C for 5 min) via disulfide exchanges, compared to the pristine epoxy vitrimers (80°C for 5 min). Significantly, the self-healing performances have been studied extensively with the flexural studies; and changes in material healing efficiency have been demonstrated based on the observed changes in modulus.
The premixed combustion of a lean hydrogen–air mixture is analyzed in this study to examine various properties and flame stabilization. A two‐dimensional (2D) analysis of a microscale combustor is performed with various shapes of bluff bodies (e.g., circular and triangular). Nine bluff bodies are placed at the entrance of the microscale combustor and solved with 2D governing equations. The analysis is performed with the three velocities of 10, 20, and 30 m/s, but the equivalence ratio is fixed in all cases. The various characteristics of the microscale combustor are studied such as the temperature of the wall, difference in peak temperature, the mean velocity at the outlet, and temperature of the exhaust gases. Flame stabilization depends on various factors such as bluff body shape and size, and the velocity of the fuel–air mixture at the inlet and recirculation zone. In comparison to all bluff body cases, we observe that the wall blade bluff body is the most efficient (low exhaust gas temperature, large recirculation zone, low mean velocity at the outlet of the microcombustor, and high wall temperature) compared with all eight other bluff body cases. Combustion efficiency is directly proportional to the wall temperature, meaning that the microcombustor with wall blade bluff bodies is more efficient with a stabilized flame. The simulation results are compared with published data on an L/D ratio of 15.
Unmanned aerial vehicles (UAV)s have unique requirements that demand engines with high power-to-weight ratios, fuel efficiency, and reliability. As such, combustion engines used in UAVs are specialized to meet these requirements. There are several types of combustion engines used in UAVs, including reciprocating engines, turbine engines, and Wankel engines. Recent advancements in engine design, such as the use of ceramic materials and microscale combustion, have the potential to enhance engine performance and durability. This article explores the potential use of combustion-based engines, particularly microjet engines, as an alternative to electrically powered unmanned aerial vehicle (UAV) systems. It provides a review of recent developments in UAV engines and micro combustors, as well as studies on flame stabilization techniques aimed at enhancing engine performance. Heat recirculation methods have been proposed to minimize heat loss to the combustor walls. It has been demonstrated that employing both bluff-body stabilization and heat recirculation methods in narrow channels can significantly improve combustion efficiency. The combination of flame stabilization and heat recirculation methods has been observed to significantly improve the performance of micro and mesoscale combustors. As a result, these technologies hold great promise for enhancing the performance of UAV engines.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.