To face the increasing demand of self-healing hydrogels with biocompatibility and high performances, a new class of cellulose-based self-healing hydrogels are constructed through dynamic covalent acylhydrazone linkages. The carboxyethyl cellulose-graft-dithiodipropionate dihydrazide and dibenzaldehyde-terminated poly(ethylene glycol) are synthesized, and then the hydrogels are formed from their mixed solutions under 4-amino-DL-phenylalanine (4a-Phe) catalysis. The chemical structure, as well as microscopic morphologies, gelation times, mechanical and self-healing performances of the hydrogels are investigated with 1 H NMR, Fourier transform infrared spectroscopy, atomic force microscopy, rheological and compression measurements. Their gelation times can be controlled by varying the total polymer concentration or 4a-Phe content. The resulted hydrogels exhibit excellent self-healing ability with a high healing efficiency (≈96%) and good mechanical properties. Moreover, the hydrogels display pH/redox dual responsive sol-gel transition behaviors, and are applied successfully to the controlled release of doxorubicin. Importantly, benefitting from the excellent biocompatibility and the reversibly cross-linked networks, the hydrogels can function as suitable 3D culture scaffolds for L929 cells, leading to the encapsulated cells maintaining a high viability and proliferative capacity. Therefore, the cellulose-based self-healing hydrogels show potential applications in drug delivery and 3D cell culture for tissue engineering.The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/adfm.201703174.For this purpose, intensive efforts have been made so far to design and fabricate self-healing hydrogels by incorporating dynamic covalent and noncovalent bonds into the hydrogel networks. [2] Since dynamic covalent bonds, such as Schiff bases, [3] disulfide bonds, [4] Diels-Alder reactions, [5] and phenylboronate complexations, [6] can integrate both the stability of covalent bonds and the reversibility of noncovalent bonds, [2a] they have been employed to prepare the self-healing hydrogels with diverse functions. In particular, chitosan-based self-healing hydrogels constructed via Schiff bases have been widely explored as biomaterials for hemostasis, [7] drug delivery, [8] cell therapy, and 3D cell culture, [3a,9] due to their good biocompatibility and automatic repair ability under physiological conditions. [3b] However, the relatively fast hydrolytic degradation rate, [2a] poor structural integrity, and weak mechanical properties [3b] of those hydrogels impede their biomedical applications for achieving longer-lasting functions. Acylhydrazone bonds, which formed via the condensation of hydrazides with carbonyl groups, are very close relatives to Schiff bases, but are much more stable. Thus, the acylhydrazone bonds have been utilized to construct the selfhealing hydrogels with robust mechanical properties. [4b,10] For instance, a strong self-healing hydrogel that...
Lightweight and flexible energy storage devices are urgently needed to persistently power wearable devices, and lithium-sulfur batteries are promising technologies due to their low mass densities and high theoretical capacities. Here we report a flexible and high-energy lithium-sulfur full battery device with only 100% oversized lithium, enabled by rationally designed copper-coated and nickel-coated carbon fabrics as excellent hosts for lithium and sulfur, respectively. These metallic carbon fabrics endow mechanical flexibility, reduce local current density of the electrodes, and, more importantly, significantly stabilize the electrode materials to reach remarkable Coulombic efficiency of >99.89% for a lithium anode and >99.82% for a sulfur cathode over 400 half-cell charge-discharge cycles. Consequently, the assembled lithium-sulfur full battery provides high areal capacity (3 mA h cm−2), high cell energy density (288 W h kg−1 and 360 W h L−1), excellent cycling stability (260 cycles), and remarkable bending stability at a small radius of curvature (<1 mm).
Rechargeable aqueous metal-ion batteries made from non-flammable and low-cost materials offer promising opportunities in large-scale utility grid applications, yet low voltage and energy output, as well as limited cycle life remain critical drawbacks in their electrochemical operation. Here we develop a series of high-voltage aqueous metal-ion batteries based on ‘M+/N+-dual shuttles' to overcome these drawbacks. They utilize open-framework indium hexacyanoferrates as cathode materials, and TiP2O7 and NaTi2(PO4)3 as anode materials, respectively. All of them possess strong rate capability as ultra-capacitors. Through multiple characterization techniques combined with ab initio calculations, water-mediated cation intercalation of indium hexacyanoferrate is unveiled. Water is supposed to be co-inserted with Li+ or Na+, which evidently raises the intercalation voltage and reduces diffusion kinetics. As for K+, water is not involved in the intercalation because of the channel space limitation.
Dip-pen nanolithography (DPN) is a nanofabrication technique that can be used to directly write molecular patterns on substrates with high resolution and registration. Over the past two decades, DPN has evolved in its ability to transport molecular and material "inks" (e.g., alkanethiols, biological molecules like DNA, viruses, and proteins, polymers, and nanoparticles) to many surfaces in a high-throughput fashion, enabling the synthesis and study of complex chemical and biological structures. In addition, DPN has laid the foundation for a series of related scanning probe methodologies, for example, polymer pen lithography (PPL), scanning probe block copolymer lithography (SPBCL), and beampen lithography (BPL), which do not rely on cantilever tips. Structures prepared with these methodologies have been used to understand the consequences of miniaturization and open a door to new capabilities in catalysis, optics, biomedicine, and chemical synthesis, where, in sum, a process originally intended to compete with tools used by the semiconductor industry for rapid prototyping has transcended that application to advanced materials discovery. This review outlines the major DPN advances, the subsequent methods based on the technique, and the opportunities for future fundamental and technological exploration. Most importantly, it commemorates the 20th anniversary of the discovery of DPN.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.