No abstract

A novel composite anode material consisting of K(2) NiF(4) -type structured Pr(0.8) Sr(1.2) (Co,Fe)(0.8) Nb(0.2) O(4+δ) (K-PSCFN) matrix with homogenously dispersed nano-sized Co-Fe alloy (CFA) has been obtained by annealing perovskite Pr(0.4) Sr(0.6) Co(0.2) Fe(0.7) Nb(0.1) O(3-δ) (P-PSCFN) in H(2) at 900 °C. The K-PSCFN-CFA composite anode is redox-reversible and has demonstrated similar catalytic activity to Ni-based cermet anode, excellent sulfur tolerance, remarkable coking resistance and robust redox cyclability.

Nearly monodisperse flowerlike CeO2 microspheres were synthesized via a simultaneous polymerization-precipitate reaction, metamorphic reconstruction, and mineralization under hydrothermal condition as well as subsequent calcination. The obtained CeO2 microsphere consists of 20-30 nm thick nanosheets as petals. It has an open three-dimensional (3D) porous and hollow structure and possesses high surface area, large pore volume, and marked hydrothermal stability. It can be doped easily after synthesis, and the initial 3D texture is maintained. The controlling factors and a possible formation mechanism are discussed in detail. This novel material can be used as a support for catalysts with various purposes. With CuO loaded on flowerlike CeO2, the catalytic activities and hydrothermal stability of Cu/CeO2 for ethanol stream reforming were examined. At 300 degrees C, the H2 selectivity reached a maximum value of 74.9 mol %, while CO was not detected within the precision of the gas chromatogram. It produced a hydrogen-rich gas mixture in the wide temperature range (300-500 degrees C) and showed excellent hydrothermal stability at high temperature (550 degrees C), which is a good choice for ethanol processors for hydrogen fuel cell applications.

Periodic density functional theory (DFT) calculations and microkinetic modeling are used to investigate the electrochemical oxidation of H2 fuel on the (001) surface of Sr2Fe1.5Mo0.5O6 (SFMO) perovskite under anodic solid oxide fuel cell conditions. Three surface models with different Fe/Mo ratios in the topmost layer-identified by ab initio thermodynamic analysis-are used to investigate the H2 oxidation mechanism. A microkinetic analysis that considers the effects of anode bias potential suggests that a higher Mo concentration in the surface increases the activity of the surface toward H2 oxidation. At operating voltage and anodic SOFC conditions, the model predicts that water desorption is rate-controlling and that stabilizing the oxygen vacancy structure increases the overall rate for H2 oxidation. Although we find that Mo plays a crucial role in improving catalytic activity of SFMO, under fuel cell operating conditions, the Mo content in the surface layer tends to be very low. On the basis of these results and in agreement with previous experimental observations, a strategy for improving the overall electrochemical performance of SFMO is increasing the Mo content or adding small amounts of an active transition metal, such as Ni, to the surface to lower the oxygen vacancy formation energy of the SFMO surface.

No abstract

No abstract

No abstract

No abstract