The tremendous improvement in performance and cost of lithium-ion batteries (LIBs) have made them the technology of choice for electrical energy storage. While established battery chemistries and cell architectures for Li-ion batteries achieve good power and energy density, LIBs are unlikely to meet all the performance, cost, and scaling targets required for energy storage, in particular, in large-scale applications such as electrified transportation and grids. The demand to further reduce cost and/or increase energy density, as well as the growing concern related to natural resource needs for Li-ion have accelerated the investigation of so-called "beyond Li-ion" technologies. In this review, we will discuss the recent achievements, challenges, and opportunities of four important "beyond Li-ion" technologies: Na-ion batteries, K-ion batteries, all-solid-state batteries, and multivalent batteries. The fundamental science behind the challenges, and potential solutions toward the goals of a low-cost and/or high-energy-density future, are discussed in detail for each technology. While it is unlikely that any given new technology will fully replace Li-ion in the near future, "beyond Li-ion" technologies should be thought of as opportunities for energy storage to grow into mid/large-scale applications.

High-capacity anode materials for lithium ion batteries (LIBs), such as spinel-type metal oxides, generally suffer from poor Li(+) and e(-) conductivities. Their drastic crystal structure and volume changes, as a result of the conversion reaction mechanism with Li, severely impede the high-rate and cyclability performance toward their practical application. In this article, we present a general and facile approach to fabricate flexible spinel-type oxide/reduced graphene oxide (rGO) composite aerogels as binder-free anodes where the spinel nanoparticles (NPs) are integrated in an interconnected rGO network. Benefiting from the hierarchical porosity, conductive network and mechanical stability constructed by interpenetrated rGO layers, and from the pillar effect of NPs in between rGO sheets, the hybrid system synergistically enhances the intrinsic properties of each component, yet is robust and flexible. Consequently, the spinel/rGO composite aerogels demonstrate greatly enhanced rate capability and long-term stability without obvious capacity fading for 1000 cycles at high rates of up to 4.5 A g(-1) in the case of CoFe2O4. This electrode design can successfully be applied to several other spinel ferrites such as MnFe2O4, Fe3O4, NiFe2O4 or Co3O4, all of which lead to excellent electrochemical performances.

A general method for preparing nano-sized metal oxide nanoparticles with highly disordered crystal structure and their processing into stable aqueous dispersions is presented. With these nanoparticles as building blocks, a series of nanoparticles@reduced graphene oxide (rGO) composite aerogels are fabricated and directly used as high-power anodes for lithium-ion hybrid supercapacitors (Li-HSCs). To clarify the effect of the degree of disorder, control samples of crystalline nanoparticles with similar particle size are prepared. The results indicate that the structurally disordered samples show a significantly enhanced electrochemical performance compared to the crystalline counterparts. In particular, structurally disordered Ni FeO @rGO delivers a capacity of 388 mAh g at 5 A g, which is 6 times that of the crystalline sample. Disordered Ni FeO @rGO is taken as an example to study the reasons for the enhanced performance. Compared with the crystalline sample, density functional theory calculations reveal a smaller volume expansion during Li insertion for the structurally disordered Ni FeO nanoparticles, and they are found to exhibit larger pseudocapacitive effects. Combined with an activated carbon (AC) cathode, full-cell tests of the lithium-ion hybrid supercapacitors are performed, demonstrating that the structurally disordered metal oxide nanoparticles@rGO||AC hybrid systems deliver high energy and power densities within the voltage range of 1.0-4.0 V. These results indicate that structurally disordered nanomaterials might be interesting candidates for exploring high-power anodes for Li-HSCs.