SUMMARY Many bacteria produce antimicrobial peptides, which are also referred to as peptide bacteriocins. The class IIa bacteriocins, often designated pediocin-like bacteriocins, constitute the most dominant group of antimicrobial peptides produced by lactic acid bacteria. The bacteriocins that belong to this class are structurally related and kill target cells by membrane permeabilization. Despite their structural similarity, class IIa bacteriocins display different target cell specificities. In the search for new antibiotic substances, the class IIa bacteriocins have been identified as promising new candidates and have thus received much attention. They kill some pathogenic bacteria (e.g., Listeria) with high efficiency, and they constitute a good model system for structure-function analyses of antimicrobial peptides in general. This review focuses on class IIa bacteriocins, especially on their structure, function, mode of action, biosynthesis, bacteriocin immunity, and current food applications. The genetics and biosynthesis of class IIa bacteriocins are well understood. The bacteriocins are ribosomally synthesized with an N-terminal leader sequence, which is cleaved off upon secretion. After externalization, the class IIa bacteriocins attach to potential target cells and, through electrostatic and hydrophobic interactions, subsequently permeabilize the cell membrane of sensitive cells. Recent observations suggest that a chiral interaction and possibly the presence of a mannose permease protein on the target cell surface are required for a bacteria to be sensitive to class IIa bacteriocins. There is also substantial evidence that the C-terminal half penetrates into the target cell membrane, and it plays an important role in determining the target cell specificity of these bacteriocins. Immunity proteins protect the bacteriocin producer from the bacteriocin it secretes. The three-dimensional structures of two class IIa immunity proteins have been determined, and it has been shown that the C-terminal halves of these cytosolic four-helix bundle proteins specify which class IIa bacteriocin they protect against.
Pediocin-like antimicrobial peptides (AMPs) form a group of lactic acid bacteria produced, cationic membrane-permeabilizing peptides with 37 to 48 residues. Upon exposure to membrane-mimicking entities, their hydrophilic, cationic, and highly conserved N-terminal region forms a three-stranded antiparallel beta-sheet supported by a conserved disulfide bridge. This N-terminal beta-sheet region is followed by a central amphiphilic alpha-helix and this in most (if not all) of these peptides is followed by a rather extended C-terminal tail that folds back onto the central alpha-helix, thereby creating a hairpin-like structure in the C-terminal half. There is a flexible hinge between the beta-sheet N-terminal region and the hairpin C-terminal region and one thus obtains two domains that may move relative to each other. The cationic N-terminal beta-sheet domain mediates binding of the pediocin-like AMPs to the target-cell surface through electrostatic interactions, while the more hydrophobic and amphiphilic C-terminal hairpin domain penetrates into the hydrophobic part of the target-cell membrane, thereby mediating leakage through the membrane. The hinge provides the structural flexibility that enables the C-terminal hairpin domain to dip into the hydrophobic part of the membrane. Despite extensive sequence similarities, these AMPs differ markedly in their target-cell specificity, and results obtained with hybrid AMPs indicate that the membrane-penetrating hairpin-like C-terminal domain is the major specificity determinant. Bacteria that produce pediocin-like AMPs also produce a 11-kDa cognate immunity protein that protects the producer. The immunity proteins are well-structured, 4-helix bundle cytosolic proteins. They show a high degree of specificity in that they largely recognize and confer immunity only to their cognate AMP and in some cases to a few AMPs that are closely related to their cognate AMP. The C-terminal half of the immunity proteins contains a domain that is involved in specific recognition of the C-terminal membrane-penetrating specificity-determining hairpin domain of the cognate AMP.
Antimicrobial peptides belonging to the pediocin-like family of bacteriocins (class IIa bacteriocins) produced by lactic acid bacteria contain several tryptophan residues that are highly conserved. Since tryptophan residues in membrane proteins are often positioned in the membrane-water interface, we hypothesized that Trp residues in bacteriocins could be important determinants of the structure of membrane-bound peptides and of anti-microbial activity. To test this hypothesis, the effects of mutating each of the 3 tryptophan residues (Trp18, Trp33, and Trp41) in the 43-residue pediocin-like bacteriocin sakacin P were studied. Trp18 and Trp33 are located at each end of an amphihilic alpha-helix, whereas Trp41 is near the end of an unstructured C-terminal tail. Replacement of Trp33 with the hydrophobic residues Leu and Phe had marginal effects on activity, whereas replacement with the more polar Tyr and Arg reduced activity 10-20 and 500-1000 times, respectively, indicating that Trp33 and the C-terminal part of the helix interact with the hydrophobic core of the membrane. Any mutation of Trp18 and Trp41 reduced activity, indicating that these two residues play unique roles. Substitutions with other aromatic residues were the least deleterious, indicating that both Trp18 and Trp41 interact with the membrane-water interface. The suggested locations of the three Trp residues are compatible with a structural model in which the helix and the C-terminal tail form a hairpin-like structure, bringing Trp18 and Trp41 close to each other in the interface, and placing Trp33 in the hydrophobic core of the membrane. Indeed, the deleterious effect of the W18L and W41L mutations could be overcome by stabilizing the hairpin-like structure by introduction of a disulfide bridge between residues 24 and 44. These results provide a basis for a refined structural model of pediocin-like bacteriocins and highlight the unique role that tryptophan residues can play in membrane-interacting peptides.
The three-dimensional structures in dodecylphosphocholine (DPC) micelles and in trifluoroethanol (TFE) of the pediocin-like antimicrobial peptide sakacin P and an engineered variant of sakacin P (termed sakP[N24C+44C]) have been determined by use of nuclear magnetic resonance spectroscopy. SakP[N24C+44C] has an inserted non-native activity- and structure-stabilizing C-terminal disulfide bridge that ties the C-terminus to the middle part of the peptide. In the presence of DPC, the cationic N-terminal region (residues 1-17) of both peptides has an S-shaped conformation that is reminiscent of a three-stranded antiparallel beta-sheet and that is more pronounced when the peptide was dissolved in TFE instead of DPC. The four positively charged residues located in the N-terminal part are found pointing to the same direction. For both peptides, the N-terminal region is followed by a well-defined central amphiphilic alpha-helix (residues 18-33), and this in turn is followed by the C-terminal tail (residues 34-43 for sakacin P and 34-44 for sakP[N24C+44C]) that lacks any apparent common secondary structural motif. In the presence of DPC, the C-terminal tails in both peptides fold back onto the central alpha-helix, thereby creating a hairpin-like structure in the C-terminal halves. The lack of long-range NOEs between the beta-sheet Nu-terminal region and the hairpin-like C-terminal half indicates that there is a flexible hinge between these regions. We discuss which implications such a structural arrangement has on the interaction with the target cell membrane.
Genes encoding pediocin-like bacteriocins are usually co-transcribed with a gene encoding a cognate immunity protein. To investigate the functionality and specificity of immunity proteins, immunity genes belonging to the bacteriocins curvacin A, enterocin A, enterocin P, leucocin A, pediocin PA-1 and sakacin P, as well as a putative immunity gene, orfY, were expressed in three bacteriocin-sensitive lactic acid bacteria (Lactobacillus sake, Carnobacterium piscicola and Enterococcus faecalis). The transformed indicator strains, each containing one of the immunity genes, were tested for sensitivity towards seven different purified bacteriocins (curvacin A, enterocin A, enterocin P, leucocin A, leucocin C, pediocin PA-1 and sakacin P). Cross-immunity was observed almost exclusively in situations where either the bacteriocins or the immunity proteins belonged to the same sequence-based subgroup. In a few cases, the functionality of immunity proteins was strain-dependent ; e.g. the leucocin A immunity gene provided immunity to enterocin A, pediocin PA-1 and leucocin A in Ent. faecalis, whereas in the other two indicators, this gene provided immunity to leucocin A only. The orfY gene, which is transcribed without a cognate bacteriocin, was shown to encode a functional immunity protein that expands the bacteriocin resistance of the strain possessing this gene. The results show that the bacteriocin sensitivity of a lactic acid bacterium strain can depend on (1) the presence of immunity genes in connection with its own bacteriocin production, (2) the presence of extra immunity genes and (3) more general properties of the strain such as the membrane composition or the presence of receptors.
Plantaricin A (plA) is a 26-residue bacteria-produced peptide pheromone with membrane-permeabilizing antimicrobial activity. In this study the interaction of plA with membranes is shown to be highly dependent on the membrane lipid composition. PlA bound readily to zwitterionic 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) monolayers and liposomes, yet without significantly penetrating into these membranes. The presence of cholesterol attenuated the intercalation of plA into SOPC monolayers. The association of plA to phosphatidylcholine was, however, sufficient to induce membrane permeabilization, with nanomolar concentrations of the peptide triggering dye leakage from SOPC liposomes. The addition of the negatively charged phospholipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol POPG (SOPC/POPG; molar ratio 8:2) enhanced the membrane penetration of the peptide, as revealed by (i) peptide-induced increment in the surface pressure of lipid monolayers, (ii) increase in diphenylhexatriene (DPH) emission anisotropy measured for bilayers, and (iii) fluorescence characteristics of the two Trps of plA in the presence of liposomes, measured as such as well as in the presence of different quenchers. Despite deeper intercalation of plA into the SOPC/POPG lipid bilayer, much less peptide-induced dye leakage was observed for these liposomes than for the SOPC liposomes. Further changes in the mode of interaction of plA with lipids were evident when also the zwitterionic phospholipid, 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphoethanolaminne (POPE) was present (SOPC/POPG/POPE, molar ratio 3:2:5), thus suggesting increase in membrane spontaneous negative curvature to affect the mode of association of this peptide with lipid bilayer. PlA induced more efficient aggregation of the SOPC/POPG and SOPC/POPG/POPE liposomes than of the SOPC liposomes, which could explain the attenuated peptide-induced dye leakage from the former liposomes. At micromolar concentrations, plA killed human leukemic T-cells by both necrosis and apoptosis. Interestingly, plA formed supramolecular protein-lipid amyloid-like fibers upon binding to negatively charged phospholipid-containing membranes, suggesting a possible mechanistic connection between fibril formation and the cytotoxicity of plA.
The two-peptide class II bacteriocins consist of two different unmodified peptides, both of which must be present in about equal amounts in order for these bacteriocins to exert optimal antimicrobial activity. These bacteriocins render the membrane of target cells permeable to various small molecules. The genes encoding the two peptides of two-peptide bacteriocins are adjacent to each other in the same operon and they are near the genes encoding (i) the immunity protein that protects the bacteriocin-producing bacteria from being killed by their own bacteriocin, (ii) a dedicated ABC transporter that transports the bacteriocin out of the bacteriocin-producing bacteria, and (iii) an accessory protein whose specific role is not known, but which also appears to be required for secretion of the bacteriocin. The production of some two-peptide bacteriocins is transcriptionally regulated through a three-component regulatory system that consists of a membrane-interacting peptide pheromone, a membrane-associated histidine protein kinase, and response regulators. Structure analysis of three two-peptide bacteriocins (plantaricin E/F, plantaricin J/K, and lactococcin G) by CD (and in part by NMR) spectroscopy reveal that these bacteriocins contain long amphiphilic α-helical stretches and that the two complementary peptides interact and structure each other when exposed to membrane-like entities. Lactococcin G shares about 55% sequence identity with enterocin 1071, but these two bacteriocins nevertheless kill different types of bacteria. The target-cell specificity of lactococcin G-enterocin 1071 hybrid bacteriocins that have been constructed by site-directed mutagenesis suggests that the β-peptide is important for determining the target-cell specificity.
The pediocin-like bacteriocins, produced by lactic acid bacteria, are bactericidal polypeptides with very similar primary structures. Peptide synthesis followed by reverse-phase and ion-exchange chromatographies yielded biologically active pediocin-like bacteriocins in amounts and with a purity sufficient for characterizing their structure and mode of action. Despite similar primary structures, the pediocin-like bacteriocins, i.e., pediocin PA-1, sakacin P, curvacin A, and leucocin A, differed in their relative toxicities against various bacterial strains. On the basis of the primary structures, the polypeptides of these bacteriocins were divided into two modules: the relatively hydrophilic and well conserved N-terminal region, and the somewhat more diverse and hydrophobic C-terminal region. By peptide synthesis, four new biologically active hybrid bacteriocins were constructed by interchanging corresponding modules from various pediocin-like bacteriocins. All of the new hybrid bacteriocin constructs had bactericidal activity. The relative sensitivity of different bacterial strains to a hybrid bacteriocin was similar to that to the bacteriocin from which the C-terminal module was derived and quite different from that to the bacteriocin from which the N-terminal was derived. Thus, the C-terminal part of the pediocin-like bacteriocins is an important determinant of the target cell specificity. The synthetic bacteriocins were more stable than natural isolates, presumably as a result of the absence of contaminating proteases. However, some of the synthetic bacteriocins lost activity, but this was detectable only after months of storage. Mass spectrometry suggested that this instability was due to oxidation of methionine residues, resulting in a 10-to 100-fold reduction in activity.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.