Bitkisel üretimde tohum çimlenmesi ve çıkış için gerekli olan optimum sıcaklık değerleri, bitki tür ya da çeşitlerine göre farklıklar göstermektedir. Sıcaklık, çimlenme ve çıkış sürecini etkileyen önemli bir çevresel faktördür. Capsicum chinense biber türü; tohum canlılığı, tohum iriliği, tohum şekli, tohum rengi yönünden yüksek düzeyde varyasyon göstermektedir. Bu çalışmada, C. chinense türüne ait biber tohumlarında sıcaklık faktörünün çimlenme kapasiteleri üzerine olan etkileri incelenmiştir. Araştırmada; C. chinense türüne ait 10 biber genotipinin tohumlarının çimlenme performansları, 11 farklı sıcaklık uygulamasında (9 °C, 12 °C, 15 °C, 18 °C, 21 °C, 24 °C, 27 °C, 30 °C, 33 °C, 36 °C, 39 °C) belirlenmiştir. Araştırma sonucunda; 9 °C ve 15 °C arasında çimlenmenin olmadığı, 21 °C ve 33 °C sıcaklık aralıklarında ise çimlenme hızı ve çimlenme oranlarının yükselen sıcaklıklara bağlı olarak artışlar gösterdiği saptanmıştır. Biber genotiplerinde, 24 °C ve 27 °C sıcaklık uygulamalarında en yüksek çimlenme oranlarına ulaşılmıştır. Çimlenme oranı değerleri yönünden CC-51 ve CC-63 genotiplerinin diğer genotiplere göre daha yüksek olduğu belirlenmiştir. Ayrıca tohumların çimlenmesi üzerine, sıcaklık esas alınarak geliştirilen matematiksel modelleme ile, çimlenme oranın tahmin edilmesi olanağı da araştırılmıştır. Bu amaçla; çimlenme potansiyellerinin tahmini için Uzun ve ark. ( 2001) tarafından önceden türetilmiş model tarafımızdan geliştirilerek [D= a+(b x T) +(c x T 2 )] şeklinde kullanılmıştır. Her bir genotip için üretilen denklemlerin regresyon katsayılarının (R 2 ), çimlenme oranı değerleri için 0.33 ile 0.95 arasında değiştiği belirlenmiştir. Çimlenme performans özellikleri yönünden öne çıkan C. chinense genotiplerinin gelecekte biber ıslah programında değerlendirilmesi planlanmaktadır.
Kültür bitkilerinde toprak kaynaklı biyotik ve abiyotik stres faktörlerine karşı dayanıklılık düzeyinin, kök sistemi mimarileri ile yakından ilişkili olduğu belirlenmiştir. Bu çalışmada; kıvırcık ve Yedikule tipi marul çeşitlerinin kök sistemi mimarisini oluşturan fenotipik kök özelliklerinin dijital kök görüntüleme sistemlerinden yararlanarak ayrıntılı olarak incelenmesi amaçlanmıştır. Araştırmada, iki farklı marul tipinde farklı firmalardan temin edilen toplam 8 çeşitte (Melina, Funtime, Asturion, Emocion, Mozole, Manto, Likea ve Presidential) kök uzunluğu, ortalama kök çapı, kök yüzey alanı ve kök hacmi özellikleri yönünden kök sistemi mimarileri incelenmiştir. Yedikule marul çeşitleri arasında belirtilen kök parametreleri yönünden istatistiksel olarak önemli düzeyde farklılıkların olduğu, ancak kıvırcık marul çeşitleri arasında ise belirgin bir farklılığın olmadığı tespit edilmiştir. Çalışmada yer alan marul tiplerinde çeşitlere ait kök uzunluklarının oransal çap sınıf değerleri de incelenmiştir. Toplam kök uzunlukları içerisinde, 1 mm’den daha küçük çaplı kök uzunluklarının oranı önemli bir parametredir ve çeşidin saçak kök yapma eğilimini gösterir. Oransal çap sınıf değerleri bakımından kıvırcık marul çeşitleri arasında %5 düzeyinde ve Yedikule marul çeşitleri arasında %1 düzeyinde istatistiksel olarak önemli düzeyde farklılıkların olduğu belirlenmiştir. Saçak kök yapma eğilimi bakımından kıvırcık marul tipinde %86.56 değeri ile KM2 çeşidi, Yedikule marul tipinde %92.66 değeri ile YM4 çeşidi ön plana çıkmıştır. Çalışmada 60. gün sonunda toplam kök uzunluğunun, kıvırcık marul çeşitlerinde 2705.4 cm (KM2) ile 3086.4 cm (KM3) ve Yedikule marul çeşitlerinde ise, 1902.6 cm (YM2) ile 2838.4 cm (YM4) arasında değişim gösterdiği tespit edilmiştir. Genel olarak, marul bitkisinde kök sistemi mimarisini oluşturan fenotipik kök özelliklerinin kıvırcık marul tipinde daha yüksek değerlere sahip olduğu ve Yedikule marul çeşitlerinin saçak kök yapma eğiliminin daha fazla olduğu saptanmıştır. Kök mimarisine ilişkin bu sonuçların gelecekte bitkilerde su ve gübre kullanımı üzerindeki etkilerine ilişkin çalışmalarda yararlı olacağı düşünülmektedir.
ÖZET: Marul, Compositae familyasının Lactuca cinsine bağlı tek yıllık bir sebze türüdür. Marulun anavatanı; Anadolu, Kafkasya, İran ve Türkistan olarak kabul edilmektedir. Ülkemiz, bitki genetik kaynakları ve genetik çeşitlilik açısından dünyanın eşsiz ve en önemli ülkelerinden birisidir. Yerel genetik kaynaklar, ıslah programlarının başarıya ulaşmasında en önemli faktörlerden birisi olan fenotipik varyasyonun temelini oluşturur. Bu çalışma 2020-2021 yılları arasında, Türkiye orijinli Yedikule tipi 28 marul genotipinin teksel seleksiyon ıslahı yöntemiyle değerlendirilmesi ve çeşit adayı olabilecek ümit var marul genotiplerinin belirlenmesi amacıyla yürütülmüştür. Ayrıca, marul genotiplerinde kendileme çalışmaları da yapılmıştır. Seleksiyonda; ilkbahar ve sonbahar yetiştirme dönemlerine uygun, sapa kalkmayan, orta irilikte, erkenci marul genotiplerinin belirlenmesi hedeflenmiştir. Bu amaçla, seleksiyon kriterleri tarafımızdan geliştirilmiş ve tartılı derecelendirme yöntemine göre değerlendirme yapılmıştır. Tartılı derecelendirme yöntemine göre Yedikule tipi marul genotipleri ilkbahar yetiştirme döneminde 254-484 arasında puan ve sonbahar yetiştirme döneminde ise 16-480 arasında puan almışlardır. Sonbahar döneminde bazı marul genotiplerinde erken sapa kalkma (bolting) durumu gerçekleşmiştir. Her iki dönem de seleksiyon kriterleri yönünden öne çıkan 6 genotip (YM-1, YM-5, YM-13, YM-14, YM-16 ve YM-19) ümit var marul genotipleri olarak seçilmiştir. Araştırma sonucunda öne çıkan marul genotiplerinin gelecekte çeşit ıslah çalışmalarında değerlendirilerek ticari üretime kazandırılması planlanmaktadır.
Bu araştırmada ısıtmasız serada sonbahar döneminde bazı kıvırcık ve Yedikule tipi marul çeşitlerinde, dikimden itibaren belirli aralıklarla yapılan ölçüm ve analiz sonuçlarına göre vejetatif büyüme ile büyüme sırasında gerçekleşen değişimlerin incelenmesi amaçlanmıştır. Çalışmada 4 adet kıvırcık ve 4 adet Yedikule olmak üzere toplam sekiz adet marul çeşidi kullanılmıştır. Dikimden itibaren 10’ar gün aralıklarla yapılan kantitatif büyüme analizlerinde bitki boyu, kök boğazı çapı, yaprak sayısı ile yaprak ve köklerin yaş ve kuru ağırlıkları belirlenmiştir. Ayrıca, toplam bitki kuru ağırlığı, oransal yaprak ağırlığı (OYA) ve oransal kök ağırlığı (OYA) değerleri de incelenmiştir. Araştırma sonucunda; marul çeşitlerinin vejetatif büyüme özellikleri yönünden belirgin farklılıklar gösterdiği belirlenmiştir. 60. gün sonunda, marul çeşitlerinde bitki boyunun 15,18-30,2 cm, kök boğazı çapının ise 11,44-17,78 mm arasında değişim gösterdiği belirlenmiştir. Kıvırcık marul çeşitlerinde yaprak sayısı yönünden istatistiksel olarak önemli düzeyde belirgin bir farklılık bulunmazken, Yedikule marul tipinde ise çeşitler arasında önemli düzeyde (p<0.05) farklılık olduğu saptanmıştır. Yedikule tipi marullarda oransal yaprak ağırlığının 0,69-0,81 arasında ve oransal kök ağırlığının ise 0,19-0,31 arasında dağılış gösterdiği belirlenmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.