Pyrite-type CoSe2 necklace-like nanowires (NWs) were successfully grown on carbon fiber paper (CFP) and proven to be an efficient electrocatalyst towards the hydrogen evolution reaction (HER).

Due to its single conduction band nature, it is highly challenging to enhance the power factor of SnSe 2 by band convergence. Here, it is reported that simultaneous Cu intercalation and Br doping induce strong Cu-Br interaction to connect SnSe 2 layers, otherwise isolated, via "electrical bridges." Atom probe tomography analysis confirms a strong attraction between Cu intercalants and Br dopants in the SnSe 2 lattice. Density functional theory calculations reveal that this interaction delocalizes electrons confined around SnSe covalent bonds and enhances charge transfer across the SnSe 2 slabs. These effects dramatically increase electron mobility and concentration. Polycrystalline SnCu 0.005 Se 1.98 Br 0.02 shows even higher electron mobility than pristine SnSe 2 single crystal and the theoretical expectation. This results in significantly improved electrical conductivity without reducing effective mass and Seebeck coefficient, thereby leading to the highest power factor of ≈12 µW cm −1 K −2 to date for polycrystalline SnSe 2 and SnSe. It even surpasses the value for the state-of-the-art n-type SnSe 0.985 Br 0.015 single crystal at elevated temperatures. Surprisingly, the achieved power factor is nearly independent of temperature ranging from 300 to 773 K. The engineering thermoelectric figure of merit ZT eng for SnCu 0.005 Se 1.98 Br 0.02 is ≈0.25 between 773 and 300 K, the highest ZT eng ever reported for any form of SnSe 2 -based thermoelectric materials.

A general approach to fabricate nanowires based inorganic/organic composite flexible thermoelectric fabric using a simple and efficacious five-step vacuum filtration process is proposed. As an excellent example, the performance of freestanding flexible thermoelectric thin film using copper telluride nanowires/polyvinylidene fluoride (Cu1.75Te NWs/PVDF = 2:1) as building block is demonstrated. By burying the Cu1.75Te NWs into the PVDF polymer agent, the flexible fabric exhibits room-temperature Seebeck coefficient and electric conductivity of 9.6 μV/K and 2490 S/cm, respectively, resulting in a power factor of 23 μW/(mK(2)) that is comparable to the bulk counterpart. Furthermore, this NW-based flexible fabric can endure hundreds of cycles of bending tests without significant performance degradation.

No abstract

Cobalt telluride branched nanostructures on carbon fiber paper (CFP) with two different morphologies were synthesized via solution-based conversion reaction. Both the CoTe2 with nanodendrite and CoTe with nanosheet morphologies on the CoTe2 nanotube (CoTe2 NDs/CoTe2 NTs and CoTe NSs/CoTe2 NTs) supported by CFP exhibit high activities toward hydrogen evolution reaction (HER). Particularly, the CoTe NSs/CoTe2 NTs only require an overpotential of 230.0 mV to deliver the current density of 100 mA cm(-2) in acid solution. After cycling for 5000 cycles or 20 h continual electrolysis, only a small performance loss is observed.

No abstract

No abstract

The photoelectron transfer between semiconductors and cells is the rate-determining step that controls the solar H2 production of whole-cell inorganic-biohybrid systems (IBSs). Herein, we constructed an IBS by using reduced graphene oxide (RGO) to integrate Shewanella oneidensis MR-1 (SW) cells and Cu2O, which exhibited a 11–38-fold enhancement of photocatalytic H2 production compared with RGO-free IBSs (Cu2O/SW and Cu2O/organic electron mediator/SW). Further analysis revealed that RGO provided multifunctional contributions to H2 production from IBS, that is, sufficient area for IBS supporting, efficient photoelectron collection from Cu2O, and effective electron distribution into the cells. This study offers opportunities for rationally designing electron transfer pathways to achieve high-performance IBSs.