No abstract

No abstract

This study arises on the opportunities of using flax fibers as reinforcement for polypropylene (PP) matrix composites. For this purpose, untreated flax fiber bundles obtained by a retting process have been used. For improving compatibility between flax fiber bundles and PP matrix, fiber surface treatments such as maleic anhydride, maleic anhydride polypropylene copolymer, and vinyltrimethoxy silane have been carried out. On the other hand, alkali treatment has also been carried out for fiber modification. The effect of surface modification on tensile properties of single fibers and also on fiber-matrix interfacial shear strength (IFSS) has been analyzed. Finally, both optical microscopy and atomic force microscopy have been used for characterizing flax fiber microstructural features. The current study completes previous results to elucidate the influence of treatments on fiber surface and flax fiber-PP interface. POLYM. COM-POS., 26:324 -332, 2005.

This paper reports a systematic study of the effects on composite properties of different chemical treatments on natural fibers. Both short flax fibers and flax cellulose pulp in a polypropylene matrix have been investigated. The influence of treatments on fiber properties was investigated by means of spectroscopic, thermal and mechanical tests. Moreover, the effects of fiber treatment on the crystallinity of the matrix were analyzed using differential scanning calorimetry and optical microscopy. The mechanical properties of the composites obtained were studied using tensile and bending tests. It is shown that most of the main properties of the composites can be improved by adequately treating the fibers. The results of this study provide a database mainly devoted to material selection for the automotive industry. This research has been performed as a part of the ECOFINA project in the framework of the 5th European Research Program of the European Community. Polym. Compos. 25:470–479, 2004. © 2004 Society of Plastics Engineers.

Practical applications of wood based composites are limited by the hydrophilic nature of cellulose, which causes dispersion and moisture absorption problems. This work rests on the effects of wood treatment on the mechanical properties of composites made with wood flour and polypropylene (WF/PP). Two different fiber treatments (mercerization with a 10% NaOH solution and functionalization with Epolene E-43 MAPP copolymer), their combined action, and two compounding methods have been studied. In addition, the investigation includes the analysis of the mechanical behavior of composites after exposure to variable conditions of temperature and moisture.