No abstract

Accurate matrix-dominated constitutive properties can be a key to accurate failure models for polymermatrix composites. This work shows the effect of nonlinear interlaminar shear stressstrain relations on delamination failure predictions for thick IM7/8552 carbon/epoxy tape laminates with wavy plies. Nonlinear finite element model (FEM) predictions and subsequent test correlations are presented. The interlaminar shear stressstrain relations are generated using short-beam shear tests and a digital image correlation full-field strain measurement technique. Test data for the wavy-ply coupons show that nonlinear shear stressstrain response is required for accurate failure prediction.

No abstract

Among the mechanical properties of polymer-matrix composite materials, the interlaminar tensile strength is among the most difficult to characterize. ASTM Standard D 6415 uses a curved-beam configuration for measuring interlaminar tensile strength. Not only the manufacturing process to produce curved-beam coupons with uniform radius and thickness could be challenging but also the curved-beam strength data typically exhibits large scatter. One question is whether ASTM D 6415 curved-beam interlaminar tensile strength data are coupon-specific, that is the curved-beam strength is not really a coupon-independent material property, suggesting that ASTM D 6415 is not adequate to measure interlaminar tensile strength. The objective of this work is to develop efficient and accurate methods to capture interlaminar tensile strength of composites. The authors expand a recently developed short-beam method coupled with the digital image correlation full-field deformation measurement technique to measuring the interlaminar tensile strength. The interlaminar tensile strength data are presented for IM7/8552 tape composite system. However, average curved-beam strength value is significantly lower compared to the short-beam test results. Micro-focus CT measurements show that porosity in the radius area is the reason for the low average strength value and the large scatter in the curved-beam strength test data. Once the stress concentration effects of porosity are captured through transfer of CT measurements into three-dimensional finite element model, the short-beam and the curved-beam test results agree. The short-beam method, which measures the interlaminar tensile strength for a pristine material, and the refined curved-beam method which accounts for manufacturing defects, represent more complete interlaminar tensile strength assessment methodology for composite structural designs.

Advanced structural analysis methods that account for manufacturing defects in composite parts are needed to enable accurate assessment of their capability and useful life and to enhance current design and maintenance practices. In particular, porosity/voids are typical defects in carbon/epoxy and glass/epoxy composite aircraft flight-critical components. High-fidelity nondestructive evaluation by X-ray computed tomography allows accurate defect measurement and automatic conversion to structural models to assess the effects of defects on structural properties. This study presents a comprehensive structural analysis methodology, which includes nondestructive detection and finite element modeling of the defects in composites. Effects of porosity/voids on interlaminar tensile and shear strength of unidirectional carbon/epoxy composite specimens are investigated. Failure predictions and subsequent test correlations are presented.

No abstract

Advanced polymeric composites are increasingly used in high-performance aircraft structures to reduce weight and improve efficiency. However, a major challenge delaying the implementation of the advanced composites is the lack of accurate methods for material characterization. Accurate measurement of three-dimensional mechanical properties of composites, stress–strain response, strength, fatigue, and toughness properties, is essential in the development of validated analysis techniques accelerating design and certification of composite structures. In particular, accurate measurement of the through-thickness constitutive properties and interlaminar tensile (ILT) strength is needed to capture delamination failure, which is one of the primary failure modes in composite aircraft structures. A major technical challenge to accurate measurement of ILT properties is their strong sensitivity to manufacturing defects that often leads to unacceptable scatter in standard test results. Unacceptable failure mode in standard test methods is another common obstacle to accurate ILT strength measurement. Characterization methods based on non-contact full-field measurement of deformation have emerged as attractive alternative techniques allowing more flexibility in test configuration to address some of the limitations inherent to strain gauge-based standard testing. In this work, a method based on full-field digital image correlation (DIC) measurement of surface deformation in unidirectional open-hole compression (OHC) specimens is proposed and investigated as a viable alternative to assessing ILT stress–strain, strength, and fatigue properties. Inverse identification using a finite element model updating (FEMU) method is used for simultaneous measurement of through-thickness elastic constants with recovery of the maximum ILT stress at failure for characterization of strength and fatigue S–N curves.

No abstract