We demonstrate that confined Tamm plasmon modes can be advantageously exploited for the realization of new kind of metal/semiconductor lasers. Laser emission is demonstrated for Tamm structures with various diameters of the metallic disks which provide the confinement. A reduction of the threshold with the size is observed. The competition between the acceleration of the spontaneous emission and the increase of the losses leads to an optimal size, which is in good agreement with calculations.

The electrical and optical improvements of AlGaInP micro-light-emitting diodes (µLEDs) using atomic-layer deposition (ALD) sidewall passivation were demonstrated. Due to the high surface recombination velocity and minority carrier diffusion length of the AlGaInP material system, devices without sidewall passivation suffered from high leakage and severe drop in external quantum efficiency (EQE). By employing ALD sidewall treatments, the 20×20 µm2 µLEDs resulted in greater light output power, size-independent leakage current density, and lower ideality factor. The forward current-voltage characteristic was enhanced by using surface pretreatment. Furthermore, ALD sidewall treatments recovered the EQE of the 20×20 µm2 devices more than 150%. This indicated that AlGaInP µLEDs with ALD sidewall treatments can be used as the red emitter for full-color µLED display applications.

Solid-state lighting using laser diodes is an exciting new development that requires new phosphor geometries to handle the greater light fluxes involved. The greater flux from the source results in more conversion and therefore more conversion loss in the phosphor, which generates self-heating, surpassing the stability of current encapsulation strategies used for light-emitting diodes, usually based on silicones. Here, we present a rapid method using spark plasma sintering (SPS) for preparing ceramic phosphor composites of the canonical yellow-emitting phosphor Ce-doped yttrium aluminum garnet (Ce:YAG) combined with a chemically compatible and thermally stable oxide, α-AlO. SPS allows for compositional modulation, and phase fraction, microstructure, and luminescent properties of ceramic composites with varying compositions are studied here in detail. The relationship between density, thermal conductivity, and temperature rise during laser-driven phosphor conversion is elucidated, showing that only modest densities are required to mitigate thermal quenching in phosphor composites. Additionally, the scattering nature of the ceramic composites makes them ideal candidates for laser-driven white lighting in reflection mode, where Lambertian scattering of blue light offers great color uniformity, and a luminous flux >1000 lm is generated using a single commercial laser diode coupled to a single phosphor element.