Although it is well known that properly used Rollover Protective Structures (ROPS) can virtually prevent agricultural tractor rollover fatalities, the U.S. still has hundreds of these fatalities per year. An estimated 1.6 million tractors are not equipped with ROPS. Many of these tractors do not have ROPS commercially available although they were originally designed to support a ROPS. Some tractors have foldable ROPS that are not used properly. Other ROPS, although meet appropriate performance standards, are not effective at eliminating continuous rolls. To meet this need, a Computer-based ROPS Design Program (CRDP) was developed to quickly generate ROPS designs based on agricultural tractor weights and dimensions. The ROPS designed with the CRDP for the Allis Chalmers 5040 tractor successfully passed the SAE J2194 static longitudinal, transverse, and vertical tests. A simple foldable ROPS lift assist was designed and tested to ease in the raising and lowering of ROPS; decreasing the raising torque from 90 Nm to less than 50 Nm, while also lowering the resisting torque to lower the ROPS. A model to determine the critical ROPS height CRH based on off-road vehicle dimensions and center of gravity (CG) height was developed and evaluated.
Spatial interpolation methods are frequently used to characterize soil attributes' spatial variability. However, inconclusive results, about the comparative performance of these methods, have been reported in the literature. Therefore, the present study aimed to analyze the efficiency of ordinary kriging (OK) and inverse distance weighting (IDW) methods in estimating the soil penetration resistance (SPR), soil bulk density (SBD), and soil moisture content (SM) using two distinct sampling grids. The soil sampling was performed on a 5.7 ha area in Southeast Brazil. For data collection, a regular grid with 145 points (20 x 20 m) was created. Soil samples were taken at a 0.20 m layer depth. In order to compare the accuracy of OK and IDW, another grid was created from the initial grid (A), by eliminating one interspersed line, which resulted in a grid with 41 sampled points (40 x 40 m). Results showed that sampling grid A presented less errors than B, proving that the more sampling points, the lower the errors that are associated with both methods will be. Overall, the OK was less biased than IDW only for SBD (A) and SM (B) maps, whereas IDW outperformed OK for the other attributes for both sampling grids.
The increasing market interest in coffee beverage, lead coffee growers around the world to adopt more efficient methods to select the best-quality coffee beans. Currently, coffee beans selection is carried out either manually, which is a costly and unreliable process, or using electronic sorting machines, which are often inefficient because some coffee beans defects, such as sour and immature beans, have similar spectral response patterns. In this sense, the present work aimed to analyze the importance of shape and color features for different machine learning techniques, such as Support Vector Machine (SVM), Deep Neural Network (DNN) and Random Forest (RF), to assess coffee beans' defects. For this purpose, an algorithm written in Python language was used to extract shape and color features from coffee beans images. The dataset obtained was then used as input to the machine learning algorithms, developed using Python and R programing languages. The data reported in this study pointed to the importance of color descriptors for classifying coffee beans defects. Among the variables used, the components G mean from RGB (Red, Green and Blue) color space and V mean from HSV (Hue, Saturation and Value) color space were some of the most relevant features for the classification models. The results reported in this study indicate that all the classifier models presented similar performance. In addition, computer vision along with machine learning algorithms can be used to classify coffee beans with a very high accuracy (> 88%).
SEGMENTAÇÃO DE IMAGENS RGB USANDO DIFERENTES ÍNDICES DE VEGETAÇÃO E MÉTODOS DE LIMIARIZAÇÃO A segmentação é um dos aspectos fundamentais envolvidos no processamento de imagens, que geralmente consiste na discriminação de objetos de interesse e fundo da imagem. O presente estudo objetivou avaliar o efeito de diferentes índices de vegetação (IV) (ExG, ExGR e NDI) no desempenho de três métodos de limiarização (Otsu, Ridler e Triângulo) em termos de precisão e tempo de processamento na segmentação de imagens. Para tal, foram utilizadas 30 imagens advindas de área cultivada com milho sob diferentes tipos de cobertura do solo (plantio convencional, casca de café e palhada). O processamento das imagens foi realizado através de algoritmos desenvolvidos com base nos IV e métodos de limiarização. A acurácia das imagens resultantes foi avaliada com a verdade de campo obtida pelo algoritmo K-means. Os resultados demonstraram desempenho superior para o método do triângulo quando precedido dos índices NDI (90,7%) e ExGR (90,23%) e dos métodos de Otsu e Ridler quando precedidos pelo NDI com 89,06% e 89,03% de acurácia, respectivamente. O tempo de processamento foi estatisticamente igual entre os métodos avaliados. De modo geral, a abordagem combinada de IV e métodos de limiarização foram capazes de separar com alta acurácia a cultura do milho do objeto de fundo.Palavras-chave: processamento de imagens, imagens digitais, método do triângulo.ABSTRACT:Image Segmentation is one of the fundamental aspects involved in image processing, which generally consists of discriminating objects of interest from its background. Thus, the objective of this study was to evaluate the effect of vegetation indices (VI) (ExG, ExGR, and NDI) on the performance of three automated thresholding methods (Otsu, Ridler, and Triangle) in terms of accuracy and processing time on image segmentation. A set of 30 images from an area cultivated with maize under different types of soil cover (conventional planting, no-tillage with coffee husk, and straw residue) were selected and processed. The images were processed through algorithms developed based on VI and thresholding methods. Then, the accuracy of the resulting images was evaluated through the ground truth image obtained by the K-means algorithm. The results demonstrated superior performance for the triangle method when preceded by the NDI (90.7%) and ExGR (90.23%) indices and the Otsu and Ridler methods when preceded by the NDI with 89.06% and 89.03% accuracy, respectively. The processing time was statistically equal among the evaluated methods. In general, the combined approach of VI and thresholding based methods were capable of separating with high accuracy the maize crop from the background.Keywords: image processing, digital images, triangle method.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.