No abstract

No abstract

2015),"Rough set based modeling for welding groove bottom state in narrow gap MAG welding", If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services.Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for digital archive preservation. AbstractPurpose -This paper aims to describe how a novel biomimetic chewing robot was designed, including its motion, force, control and mechanical designs, and shows some initial experiments about motion tracking. Design/methodology/approach -According to the biomechanics, the authors modeled the muscles of mastication in six linkages and the temporomandibular joint in higher kinematic pairs of point contact. As a result, the chewing robot was represented in a redundantly actuated parallel mechanism. With reference to literature data on the biological system, the authors specified the motion and force requirements for the robot via inverse kinematics and force analysis. A prototype of the robot was built, which has a position control system and is driven by six linear actuators. Experiments were conducted to show the capability of the robot in reproducing the human chewing motion. Findings -A chewing robot was successfully modeled and developed, which is able to simulate the motion of human mastication in a biologically faithful way. Practical implications -The chewing robot as a scientific instrument can be used to test dental materials and evaluate food textural properties of chewing. Originality/value -Two higher kinematic pairs of point contact are proposed to simulate the two temporomandibular joints. The mechanism of the novel chewing robot is the first of this kind, which has two higher kinematic pairs of point contact and is a redundantly actuated spatial parallel mechanism.

No abstract

No abstract

Human masticatory system exhibits optimal stiffness, energy efficiency and chewing forces needed for the food breakdown due to its unique musculoskeletal actuation redundancy. We have proposed a 6PUS-2HKP (6 prismatic-universal-spherical chains, 2 higher kinematic pairs) redundantly actuated parallel robot (RAPR) based on its musculoskeletal biomechanics. This paper studies the stiffness and optimization of driving force of the bio-inspired redundantly actuated chewing robot. To understand the effect of the point-contact HKP acting on the RAPR performance, the stiffness of the RAPR is estimated based on the derived dimensionally homogeneous Jacobian matrix. In analyzing the influence of the HKP on robot dynamics, the driving forces of six prismatic joints are optimized by adopting the pseudo-inverse optimization method. Numerical results show that the 6PUS-2HKP RAPR has better stiffness performance and more homogenous driving power than its non-redundant 6-PUS counterpart, verifying the benefits that the point-contact HKP brings to the RAPR. Experiments are carried out to measure the temporomandibular joint (TMJ) force and the occlusal force that the robot can generate. The relationship between these two forces in a typical chewing movement is studied. The simulation and experimental results reveal that the existence of TMJs in human masticatory system can provide more homogenous and more efficient chewing force transmission.

No abstract

Experimental verification of workspace and mouth-opening movement of a redundantly actuated humanoid chewing robot Haiying Wen Ming Cong Guifei Wang Article information:To cite this document: Haiying Wen Ming Cong Guifei Wang , (2015),"Experimental verification of workspace and mouth-opening movement of a redundantly actuated humanoid chewing robot", (2015),"Tracking and following pedestrian trajectories, an approach for autonomous surveillance of critical infrastructures", If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services.Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for digital archive preservation. AbstractPurpose -This paper aims to verify the workspace and movement performance of a redundantly actuated humanoid chewing robot. Design/methodology/approach -A redundantly actuated humanoid chewing robot with 6-PUS linkages and two higher kinematic pairs (HKPs) is introduced. The design of HKPs is specified by mimicking the temporomandibular joint (TMJ) structure obtained through a computed tomography scan of the mastication system. The border movement, mouth-opening trajectory and velocity of subjects' lower incisor point are measured by using the mandibular kinesiograph. Based on the kinematics, the envelope of the workspace is analyzed. The workspace and mouth-opening movement experiments are carried out. The border movement of the lower incisor point is measured. The mouth-opening trajectory is planned and tested on the chewing robot. Findings -Comparing with measurement results of border movement and mouth-opening movement of human, it is shown that the humanoid chewing robot can meet the workspace requirements and is able to perform mouth-opening movement like human-beings. Practical implications -The chewing robot is designed to reproduce human jaw movements and application in test of dental components and materials or evaluation of food textural properties. Originality/value -The chewing robot is inspired by the mastication system which itself is mechanically redundant because of the TMJ and more muscles than required. The novel spatial redundantly actuated chewing robot is the first of this kind with two HKPs to mimic the human TMJ and is a higher fidelity mechanism.