Recently, non-fullerene n-type organic semiconductors have attracted significant attention as acceptors in organic photovoltaics (OPVs) due to their great potential to realize high-power conversion efficiencies. The rational design of the central fused ring unit of these acceptor molecules is crucial to maximize device performance. Here, we report a new class of non-fullerene acceptor, Y6, that employs a ladder-type electron-deficient-core-based central fused ring (dithienothiophen[3.2-b]-pyrrolobenzothiadiazole) with a benzothiadiazole (BT) core to fine-tune its absorption and electron affinity. OPVs made from Y6 in conventional and inverted architectures each exhibited a high efficiency of 15.7%, measured in two separate labs. Inverted device structures were certified at Enli Tech Laboratory demonstrated an efficiency of 14.9%. We further observed that the Y6-based devices maintain a high efficiency of 13.6% with an active layer thickness of 300 nm. The electron-deficient-core-based fused ring reported in this work opens a new door in the molecular design of high-performance acceptors for OPVs.

A major challenge for organic solar cell (OSC) research is how to minimize the tradeoff between voltage loss and charge generation. In early 2019, we reported a non-fullerene acceptor (named Y6) that can simultaneously achieve high external quantum efficiency and low voltage loss for OSC. Here, we use a combination of experimental and theoretical modeling to reveal the structure-property-performance relationships of this state-of-the-art OSC system. We find that the distinctive π–π molecular packing of Y6 not only exists in molecular single crystals but also in thin films. Importantly, such molecular packing leads to (i) the formation of delocalized and emissive excitons that enable small non-radiative voltage loss, and (ii) delocalization of electron wavefunctions at donor/acceptor interfaces that significantly reduces the Coulomb attraction between interfacial electron-hole pairs. These properties are critical in enabling highly efficient charge generation in OSC systems with negligible donor-acceptor energy offset.

Organic photovoltaics (OPVs) have progressed steadily through three stages of photoactive materials development: (i) use of poly­(3-hexylthiophene) and fullerene-based acceptors (FAs) for optimizing bulk heterojunctions; (ii) development of new donors to better match with FAs; (iii) development of non-fullerene acceptors (NFAs). The development and application of NFAs with an A–D–A configuration (where A = acceptor and D = donor) has enabled devices to have efficient charge generation and small energy losses (E loss < 0.6 eV), resulting in substantially higher power conversion efficiencies (PCEs) than FA-based devices. The discovery of Y6-type acceptors (Y6 = 2,2′-((2Z,2′Z)-((12,13-bis­(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]-thiadiazolo­[3,4-e]-thieno­[2″,3″:4′,5′]­thieno-[2′,3′:4,5]­pyrrolo-[3,2-g]­thieno-[2′,3′:4,5]­thieno-[3,2-b]­indole-2,10-diyl)­bis­(methanylylidene))­bis­(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))­dimalononitrile) with an A–DA′ D–A configuration has further propelled the PCEs to go beyond 15% due to smaller E loss values (∼0.5 eV) and higher external quantum efficiencies. Subsequently, the PCEs of Y6-series single-junction devices have increased to >19% and may soon approach 20%. This review provides an update of recent progress of OPV in the following aspects: developments of novel NFAs and donors, understanding of the structure–property relationships and underlying mechanisms of state-of-the-art OPVs, and tasks underpinning the commercialization of OPVs, such as device stability, module development, potential applications, and high-throughput manufacturing. Finally, an outlook and prospects section summarizes the remaining challenges for the further development of OPV technology.

Ternary organic solar cells (OSCs) have attracted much research attention in the past few years, as ternary organic blends can broaden the absorption range of OSCs without the use of complicated tandem cell structures. Despite their broadened absorption range, the light harvesting capability of ternary OSCs is still limited because most ternary OSCs use thin active layers of about 100 nm in thickness, which is not sufficient to absorb all photons in their spectral range and may also cause problems for future roll-to-roll mass production that requires thick active layers. In this paper, we report a highly efficient ternary OSC (11.40%) obtained by incorporating a nematic liquid crystalline small molecule (named benzodithiophene terthiophene rhodanine (BTR)) into a state-of-the-art PTB7-Th:PC71BM binary system. The addition of BTR into PTB7-Th:PC71BM was found to improve the morphology of the blend film with decreased π-π stacking distance, enlarged coherence length, and enhanced domain purity. This resulted in more efficient charge separation, faster charge transport, and less bimolecular recombination, which, when combined, led to better device performance even with thick active layers. Our results show that the introduction of highly crystalline small molecule donors into ternary OSCs is an effective means to enhance the charge transport and thus increase the active layer thickness of ternary OSCs to make them more suitable for roll-to-roll production than previous thinner devices.