BoneCeramic has better osteoconductive potential and biomechanical properties and induces less root resorption compared with Bio-Oss grafting and naturally recovered extraction site.

Ahead of Print article withdrawn by publisher.

No abstract

Because of the narrow interradicular spaces and varying oral anatomies of individual patients, there is a very high risk of root proximity during the mini implants inserting. The authors hypothesized that normal occlusal loading and implant loading affected the stability of miniscrew implants placed in proximity or contact with the adjacent root. The authors implemented finite element analysis (FEA) to examine the effectiveness of root proximity and root contact. Stress distribution in the bone was assessed at different degrees of root proximity by generating 4 finite element models: the implant touches the root surface, the implant was embedded in the periodontal membrane, the implant touches the periodontal surface, and the implant touches nothing. Finite element analysis was then carried out with simulations of 2 loading conditions for each model: condition A, involving only tooth loading and condition B, involving both tooth and implant loading. Under loading condition A, the maximum stress on the bone for the implant touching the root was the distinctly higher than that for the other models. For loading condition B, peak stress areas for the implant touching the root were the area around the neck of the mini implant and the point of the mini implant touches the root. The results of this study suggest that normal occlusal loading and implant loading contribute to the instability of the mini implant when the mini implant touches the root.

To investigate the cause of mandibular implant loss, we evaluated the stress distribution in the bone under bite force when the miniimplant was near the root using three-dimensional finite element analysis. Our analysis involved four finite element models with different distances between the implant and adjacent tooth root and three loading conditions. With loading of the tooth only or both the tooth and implant, the peak stress within the bone around the implant neck, displacement, and stress surrounding the bone near the root increased as the distance between the implant and root decreased. However, with separate loading of the implant, the stress did not correlate with the distance between the implant and root. Application of bite force increases stress within bones surrounding mini-implants near the roots of adjacent teeth and may threaten implant stability, but simple orthodontic loading has little effect on the stress distribution at the mini-implant-bone interface.