Recently, conductive-bridging memristors based on metal halides, such as halide perovskites, have been demonstrated as promising components for brain-inspired hardware-based neuromorphic computing. However, realizing devices that simultaneously fulfill all of the key merits (low operating voltage, high dynamic range, multilevel nonvolatile storage capability, and good endurance) remains a great challenge. Herein, we describe lead-free cesium halide memristors incorporating a MoO X interfacial layer as a type of conductive-bridging memristor. With this design, we obtained highly uniform and reproducible memristors that exhibited all-around resistive switching characteristics: ultralow operating voltages (<0.18 V), low variations (<30 mV), long retention times (>106 s), high endurance (>105, full on/off cycles), record-high on/off ratios (>1010, smaller devices having areas <5 × 10–4 mm2), fast switching (<200 ns), and multilevel programming abilities (>64 states). With these memristors, we successfully implemented stateful logic functions in a reconfigurable architecture and accomplished a high classification accuracy (ca. 90%) in the simulated hand-written-digits classification task, suggesting their versatility in future in-memory computing applications. In addition, we exploited the room-temperature fabrication of the devices to construct a fully functional three-dimensional stack of memristors, which demonstrates their potential of high-density integration desired for data-intensive neuromorphic computing. High-performance, environmentally friendly cesium halide memristors provide opportunities toward next-generation electronics beyond von Neumann architectures.
The most attractive aspect of perovskite nanocrystals (NCs) for optoelectronic applications is their widely tunable emission wavelength, but it has been quite challenging to tune it without sacrificing the photoluminescence quantum yield (PLQY). In this work, we report a facile ligand-optimized ion-exchange (LOIE) method to convert room-temperature spray-synthesized, perovskite parent NCs that emit a saturated green color to NCs capable of emitting colors across the entire visible spectrum. These NCs exhibited exceptionally stable and high PLQYs, particularly for the pure blue (96%) and red (93%) primary colors that are indispensable for display applications. Surprisingly, the blue- and red-emissive NCs obtained using the LOIE method preserved the cubic shape and cubic phase structure that they inherited from their parent NCs, while exhibiting high crystallinity and high color-purity. Together with the parent green-emissive NCs, the obtained blue- and red-emissive NCs provided a very wide color gamut, corresponding to a Digital Cinema Initiatives-P3 of 140% or an International Telecommunication Union Recommendation BT.2020 of 102%. With the superior optical merits of these LOIE-manipulated NCs, a corresponding color conversion luminescence device provided a high external quantum efficiency (10.5%) and extremely high brightness (970 000 cd/m2). This study provides a valid route toward highly stable, extremely emissive, and panchromatic perovskite NCs with potential use in a variety of future optoelectronic applications.
Highly sensitive X-ray detection is crucial in, for example, medical imaging and secure inspection. Halide perovskite X-ray detectors are promising candidates for detecting highly energetic radiation. In this report, we describe vacuum-deposited Cs-based perovskite X-ray detectors possessing a p–i–n architecture. Because of the built-in potential of the p–i–n structure, these perovskite X-ray detectors were capable of efficient charge collection and displayed an exceptionally high X-ray sensitivity (1.2 C Gyair –1 cm–3) under self-powered, zero-bias conditions. We ascribe the outstanding X-ray sensitivity of the vacuum-deposited CsPbI2Br devices to their prominent charge carrier mobility. Moreover, these devices functioned with a lowest detection limit of 25.69 nGyair s–1 and possessed excellent stability after exposure to over 3000 times the total dose of a chest X-ray image. For comparison, we also prepared traditional spin-coated CH3NH3-based perovskite devices having a similar device architecture. Their volume sensitivity was only one-fifth of that of the vacuum-deposited CsPbI2Br devices. Thus, all-vacuum deposition appears to be a new strategy for developing perovskite X-ray detectors; with a high practical deposition rate, a balance can be reached between the thickness of the absorbing layer and the fabrication time.
Highly photoluminescent, lead‐free perovskites are of interest for displays and solid‐state light‐emitting devices. In this report, streak camera‐based time‐resolved emission and transient absorption spanning visible to deep‐ultraviolet (UV) wavelengths are utilized to study self‐trapped and free exciton dynamics in vacuum‐deposited cesium copper halide thin films of CsCu2I3 and Cs3Cu2I5. Self‐trapped exciton emission of CsCu2I3 exhibits more noticeable changes with time in the peak position and width than Cs3Cu2I5. UV‐to‐blue emission is detectable for both compositions, where free exciton emission is distinct for CsCu2I3. Transient absorption shows loss of ground‐state bleach signals at early time delays for both, and the bleach signal shifts toward higher energy as time delay increases, likely due to strains induced by the newly created self‐trapped excitons. Global analysis performed on the transient absorption results yields time constants in these materials that build an overall dynamic scheme. This work aids in building a complete picture regarding light emission in these promising materials.
Organic‐ and perovskite‐based optoelectronics, which merge excellent optoelectronic properties with potentially large and high‐throughput manufacturing, have attracted attention as emerging revolutionary technologies with considerable practical applications. Herein, the recent progresses in organic‐ and perovskite‐based photovoltaics and photodetectors with integration of judicious optical structure designs are summarized. The characterization and performance metrics of such devices from the perspectives of device architecture, physics, and material science are studied. Research related to devices having dielectric mirrors, diffracted Bragg reflectors/photonic crystals, microcavities, and 2D photonic structures as design elements is discussed. Some suggestions of promising directions for future studies are concluded.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.