In this research, the adsorption capacity of diatomaceous earth in the removal of the crystal violet dye (CV) in aqueous solution was evaluated. The experimental methodology began with the determination of the texture properties by adsorption-desorption isotherms with N2 a 77 K, the identification of functional groups by Fourier transform infrared spectrophotometry (FTIR), morphology by scanning electron microscopy (SEM) and, the pH of the isoelectric point by the point of zero charge (PZC). A categorical multifactorial design was developed with factors such as the initial concentration of the dye (300-1000 mg/dm3), the temperature (30, 35 and 40ºC) and the initial pH of the solution (5, 6, 7 and 8). The maximum adsorption capacity was of 96.1 mg/g up 30ºC and pH 8, satisfactorily fitting the experimental data to the Langmuir isotherm model with R2 = 0.99, suggesting a monolayer adsorption mechanism on a homogeneous surface. In conclusion, diatomaceous earth can be considered as an efficient adsorbent in the removal of CV in aqueous solution.
Los parámetros estructurales de 1,3,5-trifenilpirazol se determinaron con DFT/cam-B3LYP con el conjunto de bases 6-311++G(d,p). Los resultados de la estructura molecular optimizada se presentan y comparan con los datos disponibles de rayos X de la molécula o moléculas muy similares. Se proporciona un análisis completo de los espectros observados de las mediciones espectrales de FT-IR, RMN (1H y 13C) y absorción UV-Vis con TD-DFT en la misma función y conjunto de bases. Los descriptores de reactividad global y local han sido determinados. Las propiedades ONL de esta molécula también fueron investigadas. Las distribuciones de cargas del análisis de poblaciones naturales y el mapa de potencial electrostático están correlacionados. Los resultados calculados y los hallazgos experimentales se discuten y se correlacionan
Objetivo. Establecer mediante experimentos por lote la capacidad de remoción, la cinética y termodinámica de adsorción del carbón activado preparado a partir de la cáscara de yuca (Manihot esculenta) en la remoción del colorante azul directo 86. Materiales y métodos. La metodología experimental consistió en la preparación del carbón activado por activación química de la cáscara de yuca con H3PO4 y su posterior calcinación a 530°C. En la caracterización se determinaron las propiedades de textura mediante el índice de yodo e índice de azul de metileno, se cuantificaron los grupos funcionales orgánicos ácidos y básicos con el método Boehm. En el estudio por lote, el efecto de varios parámetros sobre la capacidad de adsorción fueron evaluados: el pH (2,4,8 y 10), la temperatura (25,30 y 40°C) y la concentración inicial de colorante (20,40,60,80 y 100 mg/L). Tanto las características fisicoquímicas como los ensayos de adsorción del carbón activado fueron comparadas con otro de marca comercial (CAM). Resultados. Los resultados de la caracterización indican que ambos carbones tienen una química de superficie heterogénea, de naturaleza ácida para el CAY y básica para el CAM. La máxima capacidad obtenida fue 6.1 mg/g para el CAY y de 3.7 mg/g para el CAM. Los cálculos termodinámicos indican que la remoción es espontánea y para ambos carbones la cinética se ajusta al modelo de pseudo segundo orden. Conclusión. El carbón activado obtenido a partir de la cáscara de yuca puede considerarse un adsorbente eficiente en la remoción de colorantes.
Objetivo: Realizar un estudio comparativo del proceso de clarificación de un humedal natural usando dos coagulantes, sulfato de aluminio y cascara de papa (Solanum tuberosum L). Metodología: Inicialmente se recolectó el residuo agroindustrial de diferentes establecimientos de comidas rápidas y restaurantes de la ciudad de Barranquilla donde, habitualmente, es descartado. La cáscara de papa se sometió a lavado, secado y molienda. El polvo obtenido se tamizó y envasó herméticamente en un frasco de vidrio para ser utilizado como coagulante. El sulfato de aluminio se obtuvo en el comercio. Las muestras de agua se recolectaron de la ciénaga de Malambo mediante un muestreo simple. Para remover su turbidez se realizó un ensayo de jarras que simuló los procesos de coagulación, floculación y sedimentación, teniendo como referencia los parámetros establecidos en la NTC 3903 de 2010, usando cada coagulante. Resultados: El agua objeto de estudio tuvo una turbidez inicial de 59,60 UNT. La mayor remoción de este parámetro se obtuvo con una dosis de 40 mg/L de sulfato de aluminio (92,51%); mientras que el coagulante natural removió 81,32% al emplear una dosis de 10 mg/L. Conclusiones: Se determinó que las dosis de los coagulantes, sulfato de aluminio y cáscara de papa, utilizados en esta investigación influyeron sobre la turbidez del agua de la ciénaga, impulsando al estudio y aprovechamiento de la cáscara de papa como alternativa viable en el tratamiento de las aguas.
El titanio y sus aleaciones han sido ampliamente utilizadas, en el área aeroespacial, química, en el campo energético, en la industria biomédica entre otros, principalmente por sus características de resistencia mecánica, resistencia a la corrosión, alto grado de biocompatibilidad entre otros aspectos. Una de las propiedades mas importantes, es la generación natural de una película de óxido, estable y continua, altamente adherente sobre la superficie del mismo, con espesores del orden de 5 a 10 nm. Por otro lado, la ingeniería de superficies es una alternativa importante, que no sólo nos permite generar una película de mayor espesor, con mejores propiedades, sino que además responde de manera positiva al comportamiento mecánico frente al material de contacto ya sea polímero, metal, compuesto o el mismo hueso cuando se aplica a sustituciones protésicas en sistemas biomédicos. El libro describe así algunos de los procesos de modificación superficial, sus características y aplicaciones en ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.