The surface forces apparatus (SFA) has been used for many years to measure the physical forces between surfaces, such as van der Waals (including Casimir) and electrostatic forces in vapors and liquids, adhesion and capillary forces, forces due to surface and liquid structure (e.g. solvation and hydration forces), polymer, steric and hydrophobic interactions, bio-specific interactions as well as friction and lubrication forces. Here we describe recent developments in the SFA technique, specifically the SFA 2000, its simplicity of operation and its extension into new areas of measurement of both static and dynamic forces as well as both normal and lateral (shear and friction) forces. The main reason for the greater simplicity of the SFA 2000 is that it operates on one central simple-cantilever spring to generate both coarse and fine motions over a total range of seven orders of magnitude (from millimeters to ångstroms). In addition, the SFA 2000 is more spacious and modulated so that new attachments and extra parts can easily be fitted for performing more extended types of experiments (e.g. extended strain friction experiments and higher rate dynamic experiments) as well as traditionally non-SFA type experiments (e.g. scanning probe microscopy and atomic force microscopy) and for studying different types of systems.
A new device has been designed, and a prototype built and tested, that can simultaneously measure the displacements and/or the components of a force in three orthogonal directions. The "3D sensor" consists of four or eight strain gauges attached to the four arms of a single cross-shaped force-measuring cantilever spring. Finite element modeling (FEM) was performed to optimize the design configuration to give desired sensitivity of force, displacement, stiffness, and resonant frequency in each direction (x, y, and z) which were tested on a "mesoscale" device and found to agree with the predicted values to within 4-10%. The device can be fitted into a surface forces apparatus (SFA), and a future smaller "microscale" microfabricated version can be fitted into an atomic force microscope (AFM) for simultaneous measurements of the normal and lateral (friction) forces between a tip (or colloidal bead probe) and a surface, and the topography of the surface. Results of the FEM analysis are presented, and approximate equations derived using linear elasticity theory are given for the sensitivity in each direction. Initial calibrations and measurements of thin film rheology (lubrication forces) using the "mesoscale" prototype show the device to function as expected.
No abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.