A biosensor based on atemoya peroxidase immobilised on modified nanoclay was developed for the determination of glyphosate by the enzyme inhibition method. The inhibitor effect of the biocide results in a decrease in the current response of the hydroquinone that was used as a phenolic substrate to obtain the base signal. The biosensor was constructed using graphite powder, multiwalled carbon nanotubes, peroxidase immobilised on nanoclay and mineral oil. Square-wave voltammetry was utilised for the optimisation and application of the biosensor, and several parameters were investigated to determine the optimum experimental conditions. The best performance was obtained using a 0.1 mol L(-1) phosphate buffer solution (pH 7.0), 1.9×10(-4) mol L(-1) hydrogen peroxide, a frequency of 30 Hz, a pulse amplitude of 50 mV and a scan increment of 4 mV. The glyphosate concentration response was linear between 0.10 and 4.55 mg L(-1) with a detection limit of 30 μg L(-1). The average recovery of glyphosate from spiked water samples ranged from 94.9 to 108.9%. The biosensor remained stable for a period of eight weeks.

No abstract

A handcrafted, low cost sustainable electrochemical sensor based on graphite/PLA was developed and applied for the simultaneous quantification of Pb2+ and Cd2+ in jewelry.

A composite electrode based on acrylonitrile‐butadiene‐styrene and graphite chemically modified with a bismuth film (AGCE‐BiF) was applied for the simultaneous determination of Cd2+ and Pb2+ in gasoline samples. Extraction induced by microemulsion breaking (EIMB) was used for the first time in the preparation of the samples for electroanalysis. AGCE‐BiF was characterized by SEM, AFM, CV, and SWASV. The sensor showed an increase in sensitivity via in situ modification with bismuth film. The LOD was 4 μg L−1 for Cd2+ and 2 μg L−1 for Pb2+. The results showed satisfactory recoveries and precision, being statistically compatible to those obtained with FAAS.

No abstract

No abstract