No abstract

Image-sensor technology is the foundation of many emerging applications, where the photodetector is designed to interact with incoming photons that have specific colors or wavelengths. A color filter is therefore crucial to enable the selective spectral response of the photodetector and to eliminate the crosstalk interference resulting from ambient lights. Unfortunately, a reduced detection sensitivity of the photodetector is inevitable due to an imperfect light filtering, which greatly limits the practical applications of selective-response photodetectors. Herein, we demonstrate a bulk-heterojunction (BHJ) organic composite featuring a self-filtering light responsive characteristic. Through a careful optimization of the BHJ film, the organic photodetector (OPD) demonstrates a high-selective spectral response to the infrared (IR) radiation without the need of applying a color filter. As a result, the self-filtering top-illuminated OPD exhibits a narrowband external quantum efficiency (EQE) of 53% with a narrow full width at half-maximum (fwhm) of 56 nm centering at 1080 nm. A high responsivity of 0.46 A W −1 is also achieved at 1080 nm wavelength due to the self-filtering characteristic.

In this work, we successfully demonstrated an extremely-low-voltage (0.05 V) gas sensor based on a vertical organic diode with work-function-matched electrodes.

In this research work, the gas sensing properties of halogenated chloroaluminum phthalocyanine (ClAlPc) thin films were studied at room temperature. We fabricated an air-stable ClAlPc gas sensor based on a vertical organic diode (VOD) with a porous top electrode by the solution process method. The surface morphology of the solution-processed ClAlPc thin film was examined by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The proposed ClAlPc-based VOD sensor can detect ammonia (NH3) gas at the ppb level (100~1000 ppb) at room temperature. Additionally, the ClAlPc sensor was highly selective towards NH3 gas compared to other interfering gases (NO2, ACE, NO, H2S, and CO). In addition, the device lifetime was tested by storing the device at ambient conditions. The effect of relative humidity (RH) on the ClAlPc NH3 gas sensor was also explored. The aim of this study is to extend these findings on halogenated phthalocyanine-based materials to practical electronic nose applications in the future.