No abstract

We report the first experimental demonstration of a wavelength tunable passively Q-switched red-diode-end pumped Alexandrite laser using a semiconductor saturable absorber mirror (SESAM). We present the results of the study of passive SESAM Q-switching and wavelength-tuning in continuous diode-pumped Alexandrite lasers in both linear cavity and X-cavity configurations. In the linear cavity configuration, pulsed operation up to 27 kHz repetition rate in fundamental TEM00 mode was achieved and maximum average power was 41 mW. The shortest pulse generated was 550 ns (FWHM) and the Q-switched wavelength tuning band spanned was between 740 nm and 755 nm. In the X-cavity configuration, a higher average power up to 73 mW, and obtained with higher pulse energy 6.5 J at 11.2 kHz repetition rate, in fundamental TEM00 mode with excellent spatial quality M2 < 1.1. The Q-switched wavelength tuning band spanned was between 775 nm and 781 nm

No abstract

No abstract

We report significant improvement in the performance of TEM 00 alexandrite laser operation by employing high power fibre-coupled red diode pumping, novel cavity design, and active direct Shack-Hartmann wavefront sensor measurement of pump-induced lensing. We demonstrate 12.7 W of laser power in low-order (M 2 ∼ 5) mode operation from a compact double-end-pumped cavity, and with novel cavity design, a record power of 7.4 W in TEM 00 operation with excellent beam quality (M 2 ≤ 1.1). With single-end pumping, laser power of 4.7 W (M 2 ∼ 1.3) was achieved with slope efficiencies as high as 54.9 %; a record efficiency for red-diode-pumped alexandrite. Using a birefringent filter, continuous laser wavelength tuning from 725-808 nm is achieved in diffraction-limited TEM 00 mode, with laser power of 4.7 W at 765 nm, and >1 W across 730-805 nm, which is a higher tunable power than any other directly diode-pumped vibronic laser, to the best of our knowledge.