No abstract

No abstract

No abstract

In this study, it was aimed to examine recycled aggregates (RA), which are considered as aggregates, in terms of alkali-silica reaction (ASR) before being used in concrete, to determine the risk status and to reduce the ASR value. In order to reduce and stop the ASR, the cement was replaced with clay brick and fly-ash by 10–40 %. Marble waste and Pb-Zn mine waste were used instead of RA in order to reduce aggregate reactivity. At the end of 28 days, compared to the control sample, it was observed that mortar bar samples containing tailings instead of fine RA has 18 % less expansion and marble waste (MW) added samples again instead of fine RA has 34 % less expansion. Furthermore, 40 % fly ash (FA) added samples decreased the level of ASR for 96 %, and in 10 % clay brick mixed samples ASR formation is decreased to 85 %. As a result, recycled aggregates were determined to be reactive for ASR. It has been determined that marble and lead-zinc mine facility wastes added as replace with to RA reduce the expansion effect by ASR in the cement paste. With this study, it has contributed to the safe use of the increasing use of RA in the world.

Synthetic fibers, which have become one of the main components of shotcrete, have been studied by many researchers in the laboratory environment. Unfortunately, the results obtained as a result of these researches are not suitable for underground chimneys due to the differences in ambient conditions and application differences. In this study, it is aimed to compare the results of the experiment samples prepared and kept in the laboratory with the mechanical properties of the shotcrete applied in underground conditions. For this purpose, keeping the slump and cement proportions constant, 35 cubic samples were prepared using 2 and 6 kg synthetic fiber for 1 m3 in the laboratory, and 30 cylinder samples and 6 plate samples were prepared for underground. While mechanical experiments were carried out on prepared cube and cylinder samples, the EFNARC plate test and freeze-thaw test were carried out on plate samples. It was observed that the set accelerator made a significant increase in resistance at the end of the 28 days and that the resistance of the samples prepared with polyester fibers in the laboratory environment were very high. As a result of the EFNARC panel tests performed, it was determined that the energy absorption of synthetic fibers increased with fiber amount. Thanks to this study, the energy absorption of the synthetic fiber used has been measured, and the reliability and practicality of the experiments carried out in the laboratory have been increased by evaluating the field conditions and laboratory conditions.