Geological setting and mineral composition of (apatite)-nepheline-titanite ore from the Khibiny massif enable selective mining of titanite ore, and its processing with sulfuric-acid method, without preliminary concentration in flotation cells. In this process flow diagram, titanite losses are reduced by an order of magnitude in comparison with a conventional flotation technology. Further, dissolution of titanite in concentrated sulfuric acid produces titanyl sulfate, which, in turn, is a precursor for titanosilicate synthesis. In particular, synthetic analogues of the ivanyukite group minerals, SIV, was synthesized with hydrothermal method from the composition based on titanyl-sulfate, and assayed as a selective cation-exchanger for Cs and Sr.

The production of electrolytic nickel includes the stage of leaching of captured firing nickel matte dust. The solutions formed during this process contain considerable amounts of Pb, which is difficult to extraction due to its low concentration upon the high-salt background. The sorption of lead from model solutions with various compositions by synthetic and natural titanosilicate sorbents (synthetic ivanyukite-Na-T (SIV), ivanyukite-Na-T, and AM-4) have been investigated. The maximal sorption capacity of Pb is up to 400 mg/g and was demonstrated by synthetic ivanyukite In solutions with the high content of Cl− (20 g/L), extraction was observed only with a high amount of Na (150 g/L). Molecular mechanisms and kinetics of lead incorporation into ivanyukite were studied by the combination of single-crystal and powder X-ray diffraction, microprobe analysis, and Raman spectroscopy. Incorporation of lead into natural ivanyukite-Na-T with the R3m symmetry by the substitution 2Na+ + 2O2− ↔ Pb2+ + □ + 2OH− leds to its transformation into the cubic P−43m Pb-exchanged form with the empirical formulae Pb1.26[Ti4O2.52(OH)1.48(SiO4)3]·3.32(H2O).

The modal composition of (apatite)-nepheline-titanite ore and its geological setting within apatite deposits of the Khibiny Massif allow selective mining of titanite ore and its hydrochloric acidic processing. The reaction of titanite with concentrated hydrochloric acid produces hydrated titanosilicate precipitate (TSP) which, in turn, can be a precursor in titanosilicate synthesis. It is particularly noteworthy that a synthetic analogue of korobitsynite, Na5(Ti3Nb)[Si4O12]2O2(OH)2·7H2O, was synthesized by means of TSP alteration by alkaline hydrothermal solution at 200 °C within three days. The titanosilicate obtained this way has comparatively weak cation-exchange properties regarding Cs+ and Sr2+ cations and considerable photocatalytic activity occurring under visible light, which allows the use of a synthetic korobitsynite analogue (SKR) for production of self-cleaning, sterilizing, and anti-fouling building materials.